XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control

Feature:

Product Name: Digital display embedded cabinet thermostat

Product model: XH-W2060

Temperature range: -19~99 °C

Control range: -19~99 °C

Temperature control accuracy: 1 °C

Measurement input: NTC10K waterproof probe L = 1 m

Refresh rate: 4 times / sec

Use environment: -30~60°C Humidity 20%-85%

Use environment: 12/24/220V optional

Output type: Relay output up to 10A

Appearance size: 77 x 62 x 34.5mm

Opening size: 71 x 29mm

Other functions: Power-off memory, state memory, temperature correction, delay start

Code

Code Description

Setting Range

Factory settings



P0

Operating mode

C/H

C

/

P1

Hysteresis setting

0.1-50

2

°C

P2

Temperature correction

-9~9

0

°C

P3

Delayed start

0-9

0

Minute

P4

High temperature alarm

-19~99

99

°C

P0: Temperature control mode

C: Cooling mode H: Heating mode

P1: Difference setting

For example: P1=5

Cooling mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.

Heating mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again.

P2: Temperature correction

If the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26

P3: Delayed start