Your Browsing History
REDTIGER Dash Cam Acc Multi-Size Hardwire Kit with Voltage Indicator for Dash Camera, USB C Power Port, 24H Parking Monitoring with Low Voltage Protection
- [ UNIVERSAL COMPATIBLE ]12V to 24V inputs, delivering a consistent 5V/3A MAX to REDTIGER dash cams via Type-C ports, includes four types of fuses adapters in two sets,ensuring a perfect fit across the series
- [ EASY INSTALL ] The kit comes with an installation tool that eliminates the need for a cable from the car's cigarette lighter socket. Instead, it offers a hidden wiring solution for a clean and straightforward installation process
- [ CONTINUOUS MONITOR ] The hardwired kit taps into the car battery or fuse box, ensuring a constant power supply for all day monitoring. It can keep your dashcam powered on even car is switched off
- [ LOW VOLTAGE PROTECTING ] Multiple Security Protection - With low voltage protection, REDTIGER hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.8V(+-0.2). Not suitable to trucks with voltage above 24V. More security protection like over-current, short-circuit, reverse connection, and overheat
+
+
Overview
Specs
Reviews
REDTIGER Dash Cam Acc Multi-Size Hardwire Kit with Voltage Indicator for Dash Camera, USB C Power Port, 24H Parking Monitoring with Low Voltage Protection
The REDTIGER Hardwire Kit compatible with to all REDTIGER series dash cam.
(F7N/F7NP/F7NT/F7NS/F8/F9/F17/A4/F77 Mini Dash Cam and T27/T700 Mirror Dash Cams etc. )
-Warm tips:
1. Please make sure the ACC and BAT is connected correctly.
2. Please feel free to reach us if any professional help in need.
3. Please use the dedicated hardwire kit for the REDTIGER dash cam, Because the other brands of hardwire kits are not available for Redtiger dash cams.
4. The length of this hardwire kit is 11.5 ft, various types of vehicles, especially regular passenger cars, sedans, SUVs, and trucks.
5. Therefore, when selecting a voltage hardwire kit, it is recommended to refer to the specifications and requirements of your vehicle and device to ensure compatibility and safety.
6. Note that installation steps may vary by model and situation. It is strongly recommended to refer to the vehicle manual or seek professional help before installation.
-Instructions for installation
1. Make sure everything is ready and safe before installation.
2. Locate the car's fuse box. It is usually located under the dashboard on the driver's side or in the engine compartment.
3. Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power when the ignition is on. Locate the constant power fuse slot in the fuse box. This slot provides power even when the ignition is off.
4. Connect the red wire from the hardwire kit to the ACC fuse slot. Connect the yellow wire from the hardwire kit to the constant power fuse slot. You can use a fuse tap or a fuse adapter to make the connection.
5. Find a suitable grounding point near the fuse box. It should be a metal surface that is securely connected to the vehicle's chassis.
6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector.
7. Once all the connections are secure, tuck away any excess wires and ensure they are safely routed to avoid interference with the vehicle's controls.
8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.
The REDTIGER Hardwire Kit compatible with to all REDTIGER series dash cam.
(F7N/F7NP/F7NT/F7NS/F8/F9/F17/A4/F77 Mini Dash Cam and T27/T700 Mirror Dash Cams etc. )
-Warm tips:
1. Please make sure the ACC and BAT is connected correctly.
2. Please feel free to reach us if any professional help in need.
3. Please use the dedicated hardwire kit for the REDTIGER dash cam, Because the other brands of hardwire kits are not available for Redtiger dash cams.
4. The length of this hardwire kit is 11.5 ft, various types of vehicles, especially regular passenger cars, sedans, SUVs, and trucks.
5. Therefore, when selecting a voltage hardwire kit, it is recommended to refer to the specifications and requirements of your vehicle and device to ensure compatibility and safety.
6. Note that installation steps may vary by model and situation. It is strongly recommended to refer to the vehicle manual or seek professional help before installation.
-Instructions for installation
1. Make sure everything is ready and safe before installation.
2. Locate the car's fuse box. It is usually located under the dashboard on the driver's side or in the engine compartment.
3. Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power when the ignition is on. Locate the constant power fuse slot in the fuse box. This slot provides power even when the ignition is off.
4. Connect the red wire from the hardwire kit to the ACC fuse slot. Connect the yellow wire from the hardwire kit to the constant power fuse slot. You can use a fuse tap or a fuse adapter to make the connection.
5. Find a suitable grounding point near the fuse box. It should be a metal surface that is securely connected to the vehicle's chassis.
6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector.
7. Once all the connections are secure, tuck away any excess wires and ensure they are safely routed to avoid interference with the vehicle's controls.
8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Redtiger Dash Cam Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...