Skip to main content
  • $4.90
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Phobya LED-Flexlight HighDensity 30cm - RGB (18x SMD LEDs) (83127)

    • The ultimate modding highlight!
    • Make your PC true eye-candy!
    • With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs!
    • The 4-Pin Molex extension loops through the required energy and hence still allows use of the PSU connector
    • In the box: 1x Phobya LED-Flexlight HighDensity 30cm RGB (18x SMD LED)
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    The ultimate modding highlight: the Phobya LED-Flexlight HighDensity RGB strip puts 18 RGB SMD LEDs on 30 cm and turns a PC into true eye candy. LED technology means extremely low power consumption and hardly any heat.

    Properties

    • Type: LED strip, HighDensity RGB
    • Length: 30 cm
    • LEDs: 18 SMD, RGB
    • Width: 10 mm (strip only)
    • Voltage: 12 to 14 V DC
    • Control: Phobya Flexlight RGB controller (not included)

    RGB

    RGB stands for red, green and blue. Mixing these base colors gives virtually every color of the rainbow. The strip is controlled only with the Phobya LED Flexlight RGB controller with remote control (not included), which also adds more effects.

    Light in every corner

    Pre-applied adhesive tape on the back makes mounting easy anywhere in the case: on the inside or outside of the case, wrapped around the reservoir or along the bottom of the case.

    Watertight

    The strip is watertight, which opens up new ideas with a water cooling system. It can even hang inside a reservoir for a completely new look.

    Cut to length

    • The strip can be shortened to any length you need.
    • Cut only at the cut marks (every third LED), or the last LEDs will not light up.
    • With some soldering experience the strip can also be extended, even combining Flexlights in different colors.

    HighDensity, TriBright

    TriBright LEDs, closely spaced in high density, give extreme lighting power. The black sleeved cable integrates cleanly into high-end systems.

    Outside the PC too

    Light a table from below, a couch from behind or a photo frame. With an external Phobya power supply no PC is needed, and no noisy fans disturb the silence.

    Quality you can see

    High manufacturing quality and advanced technology make the Flexlight the ultimate lighting solution. The SMD LEDs sit on a flexible strip only 10 mm wide, so it hides easily behind panels, tubing and cable runs.

    Low power, low heat

    LEDs use very little power and give off hardly any heat, so a Flexlight can run right next to tubing, a reservoir or acrylic parts.

    Installing the RGB strip

    • Clean and dry the mounting surface.
    • Peel off the backing and press the strip into place.
    • Connect the strip to the Phobya Flexlight RGB controller and choose a color or effect with the remote control.

    Technical data

    • Brand: Phobya
    • Product: LED-Flexlight HighDensity RGB
    • Length: 30 cm
    • Number of LEDs: 18
    • Light color: RGB
    • Width: 10 mm (strip only)
    • Voltage: 12 to 14 V DC
    • Mounting: Pre-applied adhesive tape

    Notes

    • Control is only possible with the Phobya LED Flexlight RGB controller, sold separately.

    In the box

    • 1x Phobya LED-Flexlight HighDensity 30 cm, RGB (18x SMD LEDs)

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by ModMyMods Return Policy

    Manufacturer Contact Info

    LOADING...