Planar Triple Monitor Stand - Supports LCD monitor 15" up to 24" and under 17.6 lbs per arm. 75mm or 100mm VESA
Learn more about the Planar 997-6035-00
Model
Brand
Planar
Model
997-6035-00
Type
Multi-Monitor Stand
Features
Features
Package Contents: 997-6035-00 Triple Monitor Stand Mounting Hardware
Additional Information: Easy installation Swivel displays side to side +/-20 degree Flexibility to tilt up and down +/- 20 degree Rotate 90° for landscape or portrait mode Cable organizer to neatly manage display cables
Compatibility: 17" - 24" LCD Monitor
Certifications & Standards: VESA: 75mm x 75mm 100mm x 100mm
Pros: Super sturdy. This thing took all three of my Samsung 23” widescreens and really cleaned up my desk. I popped the base stand out of all 3 monitors and at really looks clean and spacious. Good solid construction. I have 3 23" samsung 2333T monitors. They are actually 22" wide and they barely fit on this stand. In fact for me to get the angle of the outside monitors so they were in a decent field of view I had to offset the outside monitors behind the center one. I have included a pic so you can get an idea of what I am talking about. I was a little disappointed but it is still a good working scenario as I can see all the screen without obstruction. So dont expect to have 3 23" monitors all lined up edge to edge and the outside ones turned in at a nice angle because it wont happen. You can have them edge to edge but they will be lined up with a poor field of view if you are sitting directly in the center. They will basically be lined up straight with the outside ones barely tilted in.
Cons: I would have given this four starts but during assembly there is a plastic insert the slides over the main support and it did not fit very well. I had to really monkey around with it to get it to slide over the vertical support with the main mounting bracket attached. Also with all 3 monitors edge to edge there was no way to angle the outside monitors in without putting them behind the center one. I have worked with 3 monitors for years and for me the outside monitors must be angled in at least 30 degrees. I got about 20 degrees out of this bracket with the outside monitors behind the center and it is barely enough to get a decent field of view. (see attached pic)
Pros: Extremely durable. Fits 3x 23.6" Asus monitors, Newegg Item#: N82E16824236174. All 3 monitors sit perfectly level with one another and turn at a nice angle.
Cons: The plastic insert on one of the arms was not cut properly. As such the arm would not slide onto the center mount properly. I had to remove both plastic inserts from both arms, compare them, and make the cut. It was an easy fix with a pair of scissors of all things. It was still an extremely tight fit even after the trim to the plastic insert. The other arm slid on with a perfect fit. (minus 1 egg)
This is a two man installation with large monitors. I managed to do it on my own but I could have easily lost a monitor in the process, but it shows on the directions to use two people when installing the side monitors. It doesn't balance well until they are both secured.
Overall Review: I would avoid going larger than the monitor I listed above if you wish to have the monitors turn inward at a decent angle. The monitor measured 22" from left to right. Any longer and the arms would not turn inwards without placing the bezels of the outer monitors behind the bezel of the central monitor.
I also read reviews of several triple monitor stands where the monitors did not align at the top properly. This one worked great for the monitors I purchased.
Pros: Holds my 3x Asus 23" monitors, gives a nice look on my desktop.
Cons: Side arms are not perfectly lined up with the center, so my side monitors are slightly lower than the center. The brackets do not have adjustments to fix this, so it is kind of an eyesore. If the brackets, or even the center one, allowed adjustment up and down, this would easily be fixable.
Overall Review: I removed 1 egg for the aesthetic loss of the monitors not being in line with one another. I use this for an Nvidia Surround setup. And while it's not THAT big of a deal, I get asked all the time why they aren't in line with one another.
Pros: - Very solid build
- My 3 ASUS 23.6" fit perfectly on it
- Mostly metal all built
Cons: Missing a plastic insert for the left arm to so it would be lever on the center post, was very disappointed due to the price and a simple mistake like this would leave a bad reputation.
Overall Review: It's very well tough thru but by missing parts it leaves me to think was something else left undone like this...
Anonymous
Ownership: more than 1 year
Verified Owner
works perfectly12/29/2011 1:18:29 PM
Pros: The mount was pretty easy to put together, nothing complicated. a little on the pricey side but with in reason.
Cons: none
Overall Review: the only issue i had with this mount had nothing to do with the mount itself. i haave 3 23.6 inch monitors on it which is a little bit to big for the mount to arc the way i would prefer, the monitors are pretty much flush with one another and have a very subtle arc to them so i dont have as much of a wrap around effect for eyefinity. i would recommend putting 23" or even 22" on this mount for a better arcing effect
Pros: Holds my 3x 23" vision 3d monitors pretty stable.
Setup is fairly quick.
Cons: Aligning the three monitors so that they are all at the same height is hard to achieve perfectly. I had to make do with the side monitors being slightly lower than the center.
I wish there was slightly better cable management integrated into the arms. I had to tie the cables to the arms to keep them out of sight.
Overall Review: Make sure the surface you're putting the stand on can handle the weight of 3 monitors + the stand! It also goes without saying that you should also make sure that you have enough horizontal space to have three monitors going across - it takes up a lot of space.
Pros: Well packaged.
Easy to assemble.
Quality all metal construction.
Nice wrinkle black finish.
Very stable once setup.
Cons: None, although it could be a little pricey considering it is just a stand.
Overall Review: Using it to hold 3 HP LA2405wg, which measure 22" from outer edge horizontally. This seems to be right at the max of what this stand will hold. Could hold maybe one more inch wide if you elongated the slots on the support arms. There is room to remove some material without seriously compromising the integrity of the frame.
Can be a little tricky to get all the monitors to sit correctly aligned. Didn't have to mess with the spring tension at all tho. Once you have it set you wont want anyone bumping it or messing with it.
Very happy with it.
Cons: Even though it claims to, it doesn't fit 24" displays. Well - it does. But only if you want them in a perfectly straight line, which doesn't make much sense for most applications.
Pros: Super sturdy. This thing took all three of my Samsung 23” widescreens and really cleaned up my desk. I popped the base stand out of all 3 monitors and at really looks clean and spacious. Good solid construction. I have 3 23" samsung 2333T monitors. They are actually 22" wide and they barely fit on this stand. In fact for me to get the angle of the outside monitors so they were in a decent field of view I had to offset the outside monitors behind the center one. I have included a pic so you can get an idea of what I am talking about. I was a little disappointed but it is still a good working scenario as I can see all the screen without obstruction. So dont expect to have 3 23" monitors all lined up edge to edge and the outside ones turned in at a nice angle because it wont happen. You can have them edge to edge but they will be lined up with a poor field of view if you are sitting directly in the center. They will basically be lined up straight with the outside ones barely tilted in.
Cons: I would have given this four starts but during assembly there is a plastic insert the slides over the main support and it did not fit very well. I had to really monkey around with it to get it to slide over the vertical support with the main mounting bracket attached. Also with all 3 monitors edge to edge there was no way to angle the outside monitors in without putting them behind the center one. I have worked with 3 monitors for years and for me the outside monitors must be angled in at least 30 degrees. I got about 20 degrees out of this bracket with the outside monitors behind the center and it is barely enough to get a decent field of view. (see attached pic)