You’re seeing this ad based on the product’s relevance to your search query. If you are a seller and want to participate in this program click here to learn more.
IPv6/IPv4, 48-Port Managed 802.3at POE+ Gigabit Ethernet Switch + 4-Port 100/1000X SFP (400W) Managed 802.3at High Power PoE Switch
Learn more about the PLANET GS-4210-48P4S
Model
Brand
PLANET
Model
GS-4210-48P4S
Format & Standards
Standards
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2
Network Management Type
Managed
Ports & Interface
Primary Ports
48 x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at / af PoE injector 4 x 100/1000BASE-X mini-GBIC / SFP slots
Data Transmission
MAC Address Table
16K
Switching Method
Store and Forward
VLAN Support
Yes
Jumbo Frames
10KB
Details
Security
IEEE 802.1X port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS / TACACS+ user access authentication IP-MAC port binding MAC filtering Static MAC address DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard
Power Requirements: 100~240V AC, 50/60 Hz, auto-sensing Power Consumption: 449.9 watts (max.) / 1534 BTU
Features
Features
Physical Port: 48 x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at/af PoE injector 4 x 100/1000BASE-X mini-GBIC / SFP slots
Power over Ethernet: Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE Backward compatible with IEEE 802.3af Power over Ethernet Up to 48 ports of IEEE 802.3af / 802.3at devices powered Supports PoE power up to 36 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters PoE management - Total PoE power budget control - Per port PoE function enable / disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule
Layer 2 Features: Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering that eliminates erroneous packets to optimize the network bandwidth Supports VLAN - IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP Supports Spanning Tree Protocol - STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding Supports Link Aggregation - IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) Provides port mirror (many-to-1) Loop protection to avoid broadcast loops
Quality of Service: Ingress and egress rate limit per port bandwidth control Storm control support - Broadcast / Unknown unicast / Unknown multicast Traffic classification - IEEE 802.1p CoS - TOS / DSCP / IP precedence of IPv4 / IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies