Planet WGSW-24040 L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP / SFP Combo Managed Switch

Cost-effective IPv6 Managed Gigabit Switch Solution for SMB
Nowadays, lots of electronic products or mobile devices can browse the Internet, which means the need of IP Address increases. However, the current IPv4 network infrastructure is not capable enough to provide IP Address to each single users / Clients. The situation forces the ISP to build up the IPv6 (Internet Protocol version 6) network infrastructure speedily. To fulfill the demand, PLANET releases the IPv6 management Gigabit Ethernet Switch, the WGSW-24040 series which supports both IPv4 and IPv6 management functions. It can work with original network structure (IPv4) and also support the new network structure (IPv6) in the future. With easy and friendly management interfaces and plenty of management functions included, the WGSW-24040 series is the best choice for ISP to build the IPv6 FTTx edge service and for SMB to connect with the IPv6 network.

Physical Port
24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
4 mini-GBIC/SFP slots, shared with Port-21 to Port-24
Console interface for Switch basic management and setup

Layer 2 Features
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit
Ethernet standard
Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports.
Auto-MDI/MDI-X detection for each RJ-45 port
Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
8K MAC address table, automatic source address learning and ageing
1392Kbytes embedded memory for packet buffers
Supports VLAN
IEEE 802.1Q Tagged VLAN
Up to 255 VLANs groups, out of 4041 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Private VLAN Edge (PVE)
Supports Spanning Tree Protocol
STP, IEEE 802.1d (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (Static Trunk)
Maximum 12 trunk groups, up to 16 ports per trunk group
Up to 32Gbps bandwidth(Duplex Mode)
Provides Port Mirror (many-to-1)
Port Mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service
4 priority queues on all switch ports.
Supports for strict priority and weighted round robin (WRR) CoS policies
Ingress Shaper and Egress Rate Limit per port bandwidth control
Traffic-policing policies on the switch port

Multicast
Supports IGMP Snooping v1, v2 and v3
Querier mode support

Security
IEEE 802.1x Port-Based / MAC-Based network access authentication
IP-Based Access Control List (ACL)
MAC-Based Access Control List
Static MAC

Management
WEB-based, Telnet, Console Command Line management
Accesses through SNMPv1, v2c and v3 security set and get requests.
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTT