Question 1

is this made of metal?

Accepted Answer

Yes, It is made entirely of metal with a black coated finish. it is an excellent product

Question 2

Does this come with mounting screws for the SSD drives?

Accepted Answer

Hello,

Yes, this did come with screws for securing the SSD to the mount, as well as securing the mount to your case (if you don't already have thumbscrews, etc.).  It comes with all the mounting screws you'll need.

Question 3

The specifications state that the product can support 2 2.5" drives. Is this true, and if so, how does it secure both drives?

Accepted Answer

The outer part of the cage attaches to the case the inner part holds the drives.  Two drives fit on the inner section one above the other with screws.

Question 4

is it possible for installation of a 15mm drive AND a 9mm?

Accepted Answer

I am not absolutely certain as mine is buried in my case.   I would think it possible if you mounted the thinner device in the lower position and the thicker one above.
Of course it may depend on how much space is available "above" in the case slot position as well.

Question 5

I have a Cooler Master Cosmos case with HDD bays that slide in and out.  They only have four grommetted mounting holes.  Will this adapter/bracket allow me to mount an SSD?

Accepted Answer

Hi Larry, yes this mounting kit will let you mount any 2.5" hard drive or SSD and then the kit itself has holes that match most standard 3.5" hard drives so once you secure the SSD in the mounting kit, you should be able to use the mounting brackets from your case to secure the mounting kit within the case.

Hope this helps.

Question 6

Will this be suitable for an SSD to be mounted into a hard drive bay specifically in a Dell Vostro 260 Desktop? This desktop has rails that it needs to be attached to and then slid the rails slide into a slot, and is then fastened in place with a screw on the top.

Accepted Answer

If its a standard size HDD drive bay slot, this will work.  It can also be used with the new tool less drive bay.  This kit is used to mount 1 or 2 SSD's in one HDD drive bay.

Question 7

Different tray than my new Thor V2 case will this fit the Thor V2 seem like it would being both Rosewill?

Accepted Answer

This tray will fit in any 3.5" slot which is standard in most (if not all) cases.  So in short, you should have no problem installing it in your case :)

Question 8

will this work in a floppy drive bay ?

Accepted Answer

Floppy drive bays are generally too small for this size bracket. This fits a full size 3.5" hard drive bay

Question 9

Will this attach to the bottom holed of a HDD? I am looking for one that I can put in a sliding tray that has attachment holes in the bottom, not the sides.

Accepted Answer

I don't think so. They do have bottom hole but for the hard drive.

Question 10

I just bought a Rosewill Galaxy 1 and it only has one 2.5 drive so I need a few of these for my other ssds and hdd, this is what I would need to mount correct?

Accepted Answer

Yes, it is an adapter to allow mounting of a 2.5" drive in a 3.5" bay.

Questions & Answers