Hubcentric Rings (Pack of 4) - 66.1mm ID to 72.6mm OD - Silver Aluminum Hubrings Hub - for 66.1mm Vehicle Hub and 72.6mm Wheel Centerbore - Compatible with Nissan and Infiniti

- StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.

- HUB RING INNER DIAMETER: 66.1mm (Your vehicle's hub lip diameter needs be this size)

- HUB RING OUTER DIAMETER: 72.6mm (Your wheel's center bore needs to be this size)

- Compatible with Nissan 1988-1998 200SX, 1989-1998 240SX, 300ZX, 350Z, 370Z, 1993-2022 Altima, 1990-1995 Axxess. Compatible with Nissan 2009-2014 Cube, Maxima, 2003-2021 Murano, 2005-2022 Pathfinder, 2013-2022 Sentra. Compatible with Infiniti F45, FX35, FX45, G20, G35, G37, 1996-2001 i30, i35, 2006-2010 M35, 2003-2010 M45, 1990-2006 Q45. Compatible with Infiniti. 2014-2022 Q50, 2014-2021 Q60, 2014-2019 Q70, 2015-2019 Q70L, 2014-2022 QX50, 2014-2020 QX60, 2014-2020 QX70.

- IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.



WHAT ARE HUB CENTRIC RINGS?

(Also called hubrings, hubcentric rings, centering rings)

This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.



WHY DO I NEED IT?

You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.



HOW CAN I CONFIRM FITMENT?

- Hubrings have 2 measurements, typically in millimeters (mm).

- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 66.1mm. This should match your vehicle's hub bore.

- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 72.6mm. This should match your wheel's centerbore.





[VEHICLE FITMENT]

These hubrings are compatible with Nissan and Infiniti vehicles with a 66.1mm Hub. Your Wheel Bore must be 72.6mm. Message us with year/make/model if you have any fitment questions.



IMPORTANT NOTES - BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING

- Buyers must ensure their Vehicle's Hub is 66.1mm.

- Buyers must ensure their Wheel's Centerbore is 72.6mm.

- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.



INSTALLATION ADVISORY

Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.