Question 1

What are the optimal power supply units and motherboard sizes to pair with the CH Therm|CA-1Z1-00M1WN-00 R case for a high-performance build?

Accepted Answer

The Thermaltake Tower 600 mid-tower case supports ATX, Micro-ATX, and Mini-ITX motherboards, so choosing a full-size ATX board is optimal for maximizing compatibility and expansion options. For power supplies, it accommodates standard ATX PSUs up to about 200mm in length, which covers most high-performance units, including modular and high-wattage models needed for powerful GPUs and CPUs.

If you’re planning on a high-end build with multiple GPUs or extensive cooling, consider a slightly shorter or fully modular PSU to keep cable management neat behind the tool-free panels. Also, since this case supports large radiators up to 420mm, couple your PSU choice with a cooling solution that matches your motherboard and CPU to avoid thermal bottlenecks.

Question 2

How does the CH Therm|CA-1Z1-00M1WN-00 R case's power efficiency and heat dissipation compare to the Fractal Design Meshify C case?

Accepted Answer

The Thermaltake Tower 600 offers excellent heat dissipation thanks to its support for up to nine fans and large radiators up to 420mm, which can outperform the Fractal Design Meshify C in cooling flexibility. Its three tempered glass panels and unique open interior design help airflow, but it doesn't really affect power efficiency directly since that depends more on your components.

Compared to the Meshify C, which has a mesh front panel designed specifically for airflow, the Tower 600 relies on more fan slots and the option to orient the case horizontally for added thermal management. If your build prioritizes cooling and visual presentation, the Tower 600 provides more options, but the Meshify C might have a slight edge in passive airflow due to its front mesh panel.

Question 3

Has the CH Therm|CA-1Z1-00M1WN-00 R case experienced any firmware-related performance regressions or bugs after recent updates?

Accepted Answer

There haven’t been any reported firmware-related performance regressions or bugs specific to the Thermaltake Tower 600 case after recent updates, as the case itself doesn't have firmware. Its key features like the hidden-connector motherboard support and rotational PCIe slots are hardware-based and independent of software updates, so performance shouldn’t be affected by firmware changes.

Since this case focuses on hardware flexibility and cooling support, any firmware issues would come from the motherboard or other components rather than the case. If you’re integrating special ASUS BTF or MSI PROJECT ZERO motherboards, it’s best to keep their firmware updated separately to avoid unrelated issues that might feel case-related but originate from the board itself.

Question 4

What cooling options does the Thermaltake Tower 600 support?

Accepted Answer

The case supports up to nine fans and can accommodate radiators up to 420mm for optimal cooling.

Question 5

What is the maximum GPU length that can fit in the Thermaltake Tower 600 case?

Accepted Answer

The maximum GPU length is 280 mm with the power cover and 400 mm without the power cover.

Question 6

Is there room for a reservoir?

Accepted Answer

Yes it does.

Question 7

It comes with 2x 140mm fans?

Accepted Answer

My friend said it did for him and they were placed inside on top fan placement.

Type	ATX Mid Tower
Color	Black
Case Material	SPCC
With Power Supply	No
Power Supply	ATX Motherboards, Micro ATX Motherboards, Mini ITX Motherboards, 3.5-inch HDDs, 2.5-inch SSDs, PCIe expansion cards, ATX Power Supplies, CPU Coolers up to 210mm, GPUs up to 400mm
PSU Mount	Bottom
Motherboard Compatibility	Mini ITX (6.7" x 6.7") Micro ATX (9.6" x 9.6") ATX (12" x 9.6")
Side Panel	3mm Thick Tempered Glass x 3

Internal 3.5" Drive Bays	1 x 3.5", 1 x 2.5" or 3 x 2.5"
Hot-Swap Drive Bays	0
Expansion Slots	7

Fan Options	Right: 3 x 120mm, 2 x 120mm, 1 x 120mm 3 x 140mm, 2 x 140mm, 1 x 140mm Top: 3 x 120mm, 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm Rear: 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm Left: 3 x 120mm, 2 x 120mm, 1 x 120mm Bottom/(On the power cover): 1x 120mm, 1 x 140mm
Pre-installed Fans	Top - 2 x 140mm
Radiator Options	Side - Up to 360mm / Side - Up to 420mm
40mm Fans	1
60mm Fans	5
70mm Fans	1
80mm Fans	No
140mm Fans	4
180mm Fans	4
200mm Fans	1
220mm Fans	1
250mm Fans	1

Max GPU Length	280 mm (With power cover) / 400 mm (Without power cover)
Max CPU Cooler Height	210 mm
Max PSU Length	220 mm
Dimensions	16.6"x 11.3"x 21.7"
Weight	21.39 lbs.

Features	Distinctive Octagonal Design with Tool-Free Panels: Unique octagonal shape with three tempered glass panels that can be removed without tools for easy access. Hidden-Connector Motherboard Support: Supports ASUS BTF, MSI PROJECT ZERO, and GIGABYTE PROJECT STEALTH motherboards for a clean, cable-free build. Superior Cooling Support: Supports up to nine fans and radiators up to 420mm for optimal cooling. Three-Way VGA Installations: Flexible GPU installation with rotational PCIe slots and a floating VGA bracket. Optional Horizontal Display Stand: An optional kit allows the case to be displayed horizontally, enhancing its unique aesthetic.
Package Content	Tower 600 Case

Backordered Items

Best Sellers

Thermaltake Tower 600 Black Mid-Tower ATX Case; 3 Tempered Glass Panels; Hidden-Connector Motherboard Support; Rotational PCI-e Slots; CA-1Z1-00M1WN-00

Learn more about the Thermaltake CA-1Z1-00M1WN-00

Customer Reviews of the Thermaltake CA-1Z1-00M1WN-00

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Brand	Thermaltake
Series	Tower 600
Model	CA-1Z1-00M1WN-00
Part Number	CA-1Z1-00M1WN-00

Details
Sports Team	Atlanta Hawks
Sports League	WNBA

Item#: 2AM-000X-00339