What is the best method to mount radiators and fans in the THERMALTAKE CA-1Z3-00M1WN-00 R case for maximizing airflow and cooling efficiency?

The best way to mount radiators and fans in the Thermaltake Ceres 350 MX case is to install your radiator at the front or top panel where airflow is least obstructed, taking advantage of the three pre-installed ARGB fans for intake or exhaust. This case supports SPCC mid tower layout, so you can optimize cooling by configuring fans to pull cool air in from the front and exhaust hot air out the top or rear, ensuring efficient airflow through the radiator. Keep in mind, front radiator mounts tend to offer better performance in terms of cooler intake air, but using a top-mounted radiator can help with overall system exhaust and reducing hot air buildup inside the case. Depending on your hardware, you might want to balance airflow to prevent dust buildup and keep component temperatures within safe limits. Dual front panels allow some flexibility but can slightly affect airflow depending on which side you place the radiator.

How does the thermal management system of the THERMALTAKE CA-1Z3-00M1WN-00 R case affect the cooling efficiency for high-performance CPUs and GPUs in real-world gaming scenarios?

The Thermaltake Ceres 350 MX case includes three pre-installed ARGB fans and a mid-tower SPCC chassis designed for good airflow, which helps keep high-performance CPUs and GPUs cooler during gaming. Its dual front panels and hidden-connector motherboard compatibility allow for better cable management and unobstructed airflow, aiding thermal efficiency in real-world scenarios. That said, the cooling effectiveness depends on your exact setup and workload; high-end GPUs or overclocked CPUs can still generate significant heat. For optimal results, consider supplementing with additional fans or aftermarket CPU coolers, especially if you plan on pushing your system hard in extended gaming sessions.

Is the Thermaltake CA-1Z3-00M1WN-00 R case a budget-friendly option with enough features for a first-time PC builder?

This Thermaltake case is a solid choice for first-time builders looking for a balance of features without stretching the budget. It includes three pre-installed ARGB fans, support for E-ATX motherboards, and a USB 3.2 Gen 2 Type-C port, which are dependable specs for a mid-tower case in this range. Keep in mind that while it offers decent cooling and connectivity for most builds, storage options are a bit limited with just one 3.5" drive bay, so if you plan to add lots of HDDs, you might want to consider alternatives. Its dual front panels and hidden-connector support make cable management easier, which helps with neat builds early on.

What is the warranty period for the THERMALTAKE CA-1Z3-00M1WN-00 R case, and how effective is their RMA process in resolving defects or damages?

The Thermaltake Ceres 350 MX comes with a standard warranty period of 1 year, which covers manufacturing defects and hardware failures under normal use. This is typical for cases in this range, giving you peace of mind against initial quality issues without long-term coverage. If you encounter a defect during the warranty period, Thermaltake’s RMA process is generally straightforward but can vary depending on your location. It’s best to register the product on their website and keep your purchase receipt handy; compared to some competitors, their customer support tends to be responsive, but response times might be slower if you're outside primary markets.

How does the cooling performance of the Thermaltake CA-1Z3-00M1WN-00 R handle multi-threaded CPU builds compared to the Corsair 4000D Airflow case?

The Thermaltake Ceres 350 MX offers solid cooling for multi-threaded CPU setups thanks to its three pre-installed ARGB fans and good airflow design in a mid-tower chassis. It’s well-suited for typical mid-range to some high-end CPUs, but it won’t outperform a Corsair 4000D Airflow in pure thermal efficiency since that Corsair model is known for its mesh front panel optimizing front-to-back airflow. If your build is pushing very high TDP CPUs or overclocking heavily, the Corsair 4000D Airflow is generally better suited for maintaining lower temps during long multi-threaded loads. However, the Thermaltake case gives you added aesthetics with ARGB fans and dual front panel options, so it’s a trade-off between style and slightly better thermal management.

What types of motherboards are compatible with this case?

The case is compatible with ATX, E-ATX, Micro ATX, and Mini ITX motherboards.

What size of Graphics Card can this case comfortably accommodate?

The case can accommodate a GPU with a maximum length of 360 mm.

Is the front panel of this case equipped with USB ports?

Yes, the front panel of this case is equipped with USB ports.

Does this case come with any pre-installed fans?

Yes, this case comes with 2 CT140 ARGB Sync PC Cooling Fans pre-installed at the front and 1 CT140 PC Cooling Fan pre-installed at the rear.

Can I add additional drives to this case?

Yes, the case supports 1 x 3.5" HDD or 2.5" SSD and 2 x 2.5" SSD internal drive bays.

Super Flower Zillion FG 1050W Cybenetics Platinum, 80+ Gold, Full Modular, ATX 3.1 / PCIe 5.0, W/12V-2x6 Cable (2x8pin - 16pin native cables), Power Supply, FDB Fan, SF-1050Z12FG, Black version

(24)

$99^.99 –

$139^.99

Free 30-day Returns

This product is available for $139.99 from a Top Rated seller.

Limit 99999 per customer.

Add to PC build list

Sold by Newegg

Shipped by Newegg

Price alert

Add to Wish List

Best Sellers

Thermaltake

Top Rated

4.1 (935 total ratings)

$139^.99
+ $4.99 Shipping

Get Educated

Make informed decisions with expert advice. Learn More

More Resources

Computer Case Size Buying Guide

ATX Mid-Tower PC Cases

Thermaltake Ceres 350 MX Black Mid Tower ATX Case; 3 Pre-installed ARGB Fans; Dual Front Panels; Hidden-Connector Motherboard Compatible; CA-1Z3-00M1WN-00

(4) Write a Review

Options: Black

Snow
Black

SPCC E-ATX Mid Tower Chassis
1 x USB 3.2 Gen 2 Type-C, 2 x USB 3.0, 1 x Audio Front Ports
1 x 3.5" HDD / 2.5" SSD Internal 3.5" Drive Bays

🔥Don't forget your OS, we have Windows 11 OEM, Download and USB versions available

Overview

Specs

Reviews (4)

See all Q & A

Any questions? Ask Celeste^SM will help you find out quickly.

Try me now

Thermaltake Ceres 350 MX Black Mid Tower ATX Case

Ceres 350 MX Mid Tower Chassis

CA-1Z3-00M1WN-00

Design Your Ideal PC

Ceres 350 MX Mid Tower Chassis is an ATX case that supports the latest Hidden-Connector motherboards (ASUS BTF series, MSI PROJECT ZERO series and GIGABYTE PROJECT STEALTH series) and comes with two interchangeable front panels. Featuring two CT140 ARGB Sync PC Cooling Fans at the front and one CT140 PC Cooling Fan at the rear, its RGB lighting can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock. Up to five 140mm fans or seven 120mm fans can be installed in the chassis, and one 360mm radiator can be placed at the front of the chassis. What's more, the Ceres 350 MX Mid Tower Chassis is compatible with a separately sold LCD panel kit with a 2.1" circular LCD display to maximize the visual effects of the PC to its full potential.

* The image is for reference only.

Compatible with Hidden-Connector Motherboards

Created for next-generation Hidden-Connector motherboards, the Ceres 350 MX Mid Tower Chassis features a special design that enables support for both standard motherboards and hidden-connector motherboards.

Compatible with hidden-connector motherboards:

ASUS BTF Series
MSI PROJECT ZERO Series
GIGABYTE PROJECT STEALTH Series

* The image is for reference only.

Dual Interchangeable Front Panels

The Ceres 350 MX Mid Tower Chassis offers two interchangeable front panels: a tempered glass panel and a perforated panel. The former for a great look and the latter for better airflow. Users have the flexibility to display their PC build the way they want.

Built for Massive Airflow

More than 55% of its panels are perforated (with the perforated panel)

With plenty of perforated cutouts, the Ceres 350 MX is designed with excellent cooling performance.

Supports up to a 360mm Radiator at the Front and a 280mm at the Top

Our Ceres 350 MX provides a lot of possibilities for cooling components. Users can choose to place a 360mm radiator at the front and a 280mm at the top.

* The image is for reference only.

Two CT140 ARGB Sync PC Cooling Fans and One CT140 PC Cooling Fan Pre-installed

Ceres 350 MX features two 140mm ARGB PWM fans at the front, and one 140mm PWM fan at the rear. The LED lighting effects can be manipulated with motherboard supported software. Users can create an amazing RGB lighting show while enjoying extreme cooling performance at the same time.

Unify Your Fans with Your Build!

Thermaltake launches brand-new CT series fans, allowing users to choose from black or white, RGB or non-RGB, to match whatever color scheme you have.

CT140

CT140 ARGB

CT140 White

CT140 ARGB White

CT120

CT120 ARGB

CT120 White

CT120 ARGB White

Visually Pleasing, Totally Interactive

Maximize your Ceres 350 MX’s visual effects by upgrading it with our 2.1" Circle LCD Screen Kit

The 2.1" Circle LCD Screen Kit allows you to monitor real-time information and upload any images or GIFs to add extra flair using the TT RGB Plus 2.0 software. It also allows you to interact with the cooling components that feature the same LCD displays. The latest version includes weather mode and time mode for users to expand the usage of our LCD displays.

* The image is for reference only.

GIFs

Real-Time Information

Time

Weather

Tempered Glass Panels

The 4mm tempered glass panel on the left side and the 3mm tempered glass panel on the front offer stunning views and also allows users to fully display and admire all components in their full RGB glory.

Display It Your Way

Rotational PCI-E slots give you the option of mounting your graphics card either horizontally or vertically, providing plenty of flexible space for your system. If you choose to install your graphics card vertically, there is a space for the riser cable standoffs, allowing for a 90-degree riser cable installation.

* The image is for reference only.

Air Intake and Exhaust

The cooling performance of the Ceres 350 MX is remarkable thanks to two CT140 ARGB Sync PC Cooling Fans pre-installed at the front and one CT140 PC Cooling Fan pre-installed at the rear, which provide massive airflow through its perforated cutouts.

Perfect Dust Protection

There are fine removable filters at the top, front, bottom, left and right side of the chassis to provide excellent protection against dirt, and they are easily removable for cleaning.

Opportunities For High-End Expansion

The Ceres 350 MX Mid Tower chassis has good expandability. It can support for both standard motherboards and hidden-connector motherboards, a CPU cooler with a maximum height of 185mm, GPU placement of up to 370mm in length (without radiator), and a power supply up to 220mm in length. Optimized for excellent cooling performance, the case comes with two CT140 ARGB Sync PC Cooling Fans pre-installed at the front and one CT140 PC Cooling Fan pre-installed at the rear; you can choose to install two 140mm fans at the front and on top, or three 120mm fans at the front and on top. For radiator compatibility, it can support up to 360mm at the front, giving more options for high-end expansions!

Dimensions

Storage

Fan Capacity

Radiator Capacity

Handy I/O Ports

Two USB 3.0, one USB 3.2 Gen 2 Type C and HD Audio ports are placed on the top of the front panel to grant direct access when needed.

All-in-One Compatibility List

	120mm	240mm	360mm	140mm	280mm	420mm
Front	✓	✓	✓	✓	✓	✘
Top	✓	✓	✘	✓	✓	✘
Rear	✓	✘	✘	✘	✘	✘

Fan Support List

	120mm	140mm	200mm
Front	3	2	✘
Top	3	2	✘
Rear	1	1	✘

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Aura Addressable Header

ASUS

Digital Pin Header

GIGABYTE

JRAINBOW Header

MSI

Addressable RGB LED Header

ASRock

Category	Caution
Chassis, ARGB Fan, ARGB AIO	The motherboard signal connector only supports a 5V header. Make sure your motherboard software is the latest version.
RGB Memory, VGA Waterblock, Distro Plate	This product can only be used with either the TT RGB PLUS software or the dedicated motherboard software. Having more than two applications open may cause conflicts. The motherboard signal connector only supports a 5V header. Make sure your motherboard software is the latest version.

Ceres 350 MX Mid Tower Chassis is an ATX case that supports the latest Hidden-Connector motherboards and comes with two interchangeable front panels. Featuring two CT140 ARGB Sync PC Cooling Fans at the front and one CT140 PC Cooling Fan at the rear, it supports up to a 360mm radiator at the front and a 280mm radiator on the top.

Type	E-ATX Mid Tower Chassis
Color	Black
Case Material	SPCC
With Power Supply	No
PSU Mount	Bottom
Motherboard Compatibility	ATX / E-ATX / Micro ATX / Mini ITX
Side Panel	2 x Sides Tempered Glass Panel

External 5.25" Drive Bays	No
External 3.5" Drive Bays	No
Internal 3.5" Drive Bays	1 x 3.5" HDD / 2.5" SSD
Internal 2.5" Drive Bays	2 x 2.5" SSD
Expansion Slots	7

Fan Options	Front: 3 x 120mm, 2 x 120mm, 1 x 120mm 2 x 140mm, 1 x 140mm Top: 3 x 120mm, 2 x 120mm, 1 x 120mm 2 x 140mm, 1 x 140mm Rear: 1 x 120mm, 1 x 140mm Preinstalled 2 x Thermaltake CT140 ARGB Fans and 1 x 140mm rear fan
Pre-installed Fans	Front - 2 x 140mm / Rear - 1 x 140mm
Radiator Options	Front: 1 x 360mm, 1 x 240mm, 1 x 120mm, 2 x 140mm, 1 x 140mm Top: 1 x 280mm, 1 x 240mm,1 x 140mm, 1 x 120mm Rear: 1 x 120mm

Max GPU Length	360 mm
Max CPU Cooler Height	185 mm
Max PSU Length	220 mm
Dimensions	18.8"x 9.7"x 18.3"
Weight	19.51 lbs.

Best Sellers

Sponsored Products