Tripp Lite's B126-4X4 HDMI over Cat5/6 Matrix Splitter Switch and Transmitter Unit allows you to share high-definition video and audio from four HDMI-enabled digital video components (e.g., DVR, Cable Box, Blu-Ray, HD gaming consoles, etc.) to four different monitors. When used with Tripp Lite Active HDMI receivers, it can extend a 1080P signal up to 125ft, and 1080i up to 175ft.
- Share multiple HDMI sources between multiple monitors - Allows any input to be routed to any output; or the same input to be routed to multiple outputs - Transmits the signal over one Cat5e/6 cable to a remote monitor up to 175 ft. away - A B126-Series remote receiver is needed at each monitor - For longer distances: Use a B126-1A0 or B126-1A0-WP-1 active remote receiver to extend a 1080p @ 60Hz signal up to 125 ft. from the transmitter (or a 1080i @ 60Hz signal up to 175 ft. from the transmitter) - For shorter distances: Use a B126-1P0 or B126-1P0-WP-1 passive remote receiver to extend a 1080p @ 60Hz signal up to 50 ft. from the transmitter (or a 1080i @ 60Hz signal up to 75 ft. from the transmitter) - Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution - Further expand the range and number of monitors by adding B126-110 remote repeater units - Add up to three repeaters on each channel of the matrix switch, for a total of 4 displays per channel (An active remote receiver should be the last unit in a channel) - A 1080p @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i @60Hz signal) - Switch between inputs via pushbuttons, remote control,or RS232 serial - HDCP-compatible - Mounting hardware included - Plug-and-play; no software or drivers required - Compatible with all operating systems - Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Dimensions & Weight
1.20" x 5.90" x 3.90" (H x W x D)
B126-4X4 Transmitter Unit External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A 3.5 mm to DB9 Adapter Cable ( serial ) Mounting Hardware Remote Control Owner's Manual