Montech Flyer Micro ATX Computer Gaming Case/ High-Airflow, Acrylic Side Panel, Pre-Installed 2 x 120mm Fan, Hairline Surface Front Panel, RGB LED Shinning Strip/ Micro ATX, Mini-ITX/ Black, White

Pros: Decent space to size ratio Good construction Fairly modular

Cons: No instructions Difficult/impossible to take off the front panel 240mm radiator will not fit with fans on the inside (I placed the fans outside of the case and radiator inside.) Cable management could be better

Overall Review: I would recommend this product overall. It is a solid case at a very budget price. There are smaller and more efficient out there, but not at this price point.

Pros: - looks great, very clean - great cable management options - airflow is decent - easy to work in - Fits large CPU air cooler with no problem - lightweight

Cons: - PSU filter could be improved - fit and finish could be improved but pretty good for the price range. - No real user manual or description of what all the included hardware is or what its for.

Overall Review: I recently built a new computer but there is a lot of life left in my old system so I decided to give it a face-lift with this new case and I am very pleased with the result. The features of this case are what set it apart from others in this price range. You don't see a lot of these options or aesthetics in any other similarly priced micro-atx cases. I also like that it perfectly fits a 154mm deep cpu cooler using the included mb standoffs. My only gripe is that the side panel is clear acrylic. Montech said they changed it to clear acrylic because a lot of feedback said the older dark side panel was too dark for a lot of customers. I understand the logic and appreciate the company listens to reviews but I would have preferred the darker side panel. I did have to contact Montech about an issue and their customer support is excellent, it makes a huge difference when you buy something and you know if you have any issues you will receive great customer service. Overall I would definitely recommend this case.

Overall Review: i wouldnt recommend this the power button doesnt even work

Pros: price build quality light weight

Cons: not alot of room for cable management, alot of just packing it in full size Modular PSU barely fits with harddrive rack not alot of room for cable management

Overall Review: A really solid case, was amazing at how low priced it is and what you get, tempered glass at this range is unheard of. Lightweight but sturdy, solid feel The only problem I had is that will full fans and controller, and the PSU all the cables barely fit and a full ATX motherboard is a tight squeeze with top fans but works. I had to remove the harddrive rack, put in the power supply with the cables already in and then put the harddrive rack back in for it all to fit, Its a REAL tight squeeze but luckily the shroud hides the mess. The back panel could be wider and have more room, there's barely enough space for the thick motherboard cable to fit behind and it does cause the back panel to bow a bit when secured. Coolermaster hyper 212 black BARELY has clearance for the glass panel but WILL work I would recommend this if you are using a micro-atx and not as many fans without a controller, otherwise its a real pain. If youre okay with using the ssd mounts on top of the shroud and just ditching the harddrive rack you'll have alot better time too.

Pros: Cheap, attractive, overall pretty decent case especially for the price. You can install a 360mm radiator in front.

Cons: You can't install fans with your 360mm radiator. Or a front-mounted 240mm radiator. You also can't fit a 240mm radiator in front except with the tubing at the top, unless you consider a Dremel to be a viable PC build tool. RGB color is pretty hyperactive - I'd rather have a MUCH, MUCH, MUCH slower cycling mode, or just a static color gradient. A few more anchor points for cable management would be nice, especially in the area above the 3.5" bays.

Overall Review: Overall I'm pretty happy with the case, but be aware: if you want to use a typical AIO liquid cooling setup, even a 240mm radiator is a pretty tight fit. The one I got (Corsair H100-something-or-other) physically cannot be mounted in the front in any way that allows it to align properly with both fans. It also can't be installed, with or without fans, in the tubes-down orientation. I ended up top-mounting the radiator, which didn't really fit very well either - the radiator was pressed pretty firmly against the 8-pin CPU power header, and the shroud of one of the fans sits pretty firmly against the side of my RAM, and also blocks access to the DIMM latches. Overall, it was workable and a nice enough case for the price, but I was really disappointed about the claim for radiator support. Don't claim you can fit a radiator if you can't fit fans with it.

Pros: RGB is nice and elegant Fans were a plus Fit all my hardware Mostly easy to build in

Cons: PSU shroud. Wish it was detachable. Had a hard time installing a Hard Drive. Better to do it first before adding PSU

Overall Review: Really enjoyed it for the price. Acrylic was easily scratchable. But since it's tinted. It's not too much of a problem. But over all pretty solid case. Would recommend

Pros: Four fans and all with rgb and it has a compact compartment that is great for to keep it looking nice and neat. This also has a super nice tempered glass on the side that will showcase your build and personally makes my room look 1000000 times better

Cons: None

Overall Review: Buy this, it’s 100% worth it

Pros: Slightly bigger than my old HP pre-built my wife was using so she loves the size LED strip on front is bright but not too bright to be obnoxious 10 tie down points for cable management Front panel comes completely off once the LED connector is disconnected 2 supplied fans are quiet and work well Plenty of routing holes

Cons: No rubber grommets in routing holes Snap off expansion slots, not reusable Acrylic side panel holes were just slightly off, had to manipulate it even with 3 of the 4 screws loosely in place

Overall Review: If doing another Mirco ATX or possible ITX build will get this case again Lots of space for a tiny case I was worried about the airflow situation with such a small mess opening on the front but at idle my wife's new computer sits just a couple degrees higher than mine with the 2 pre-installed fans. She will be using this for photo-editing so I am sure it won't get too hot.