Question 1

Hello, it looks like a 200 mm fan will mount on BOTH side panels (left and right). Is this true?

Accepted Answer

No, you will not be able to. The left side of the case has indentations for fans. The right side of the case does not. The right side is perforated like the left, so while you could "make it work", the case is not designed for fan mounting on the right side. Also, the right side is where the MOBO attaches to the case, so probably not enough clearance for a fan. Airflow would not best be served on this side due to the obstruction of the MOBO mount.

Question 2

Is the reset button supposed to be illuminated?

Accepted Answer

If I wired mine correctly, the reset button light acts as the hard drive light - it glows red whenever the hard drive is being accessed.

Question 3

What is the maxium GPU size this case can handle?

Accepted Answer

All mainstream gpu's should have no problem fitting. Part of reason I bought this case.... the drive bays are facing left to right so cable connections will not interfere with gpu's and the spacing is more than any of the powerful gpu's require that I've researched.

Question 4

will this case accept an atx power supply or do i need a micro atx supply?

Accepted Answer

The arc power supply will fit but if you want to put a giant fan on the side wall the power supply will be in the way and won't be able to shut it completely which can get really annoying. that is what I have to suggest.

Question 5

what motherboard fits this case?? I cant seem to find one PLS REPLY one that will go with AMD A6-5400K Trinity Dual-Core 3.6GHz (3.8GHz Turbo) Socket FM2 65W Desktop APU (CPU + GPU) with DirectX 11 Graphic AMD Radeon HD 7540D AD540KOKHJBOX

Accepted Answer

Just go the motherboard section and set the search parameters for Form Factor - "Micro ATX" and "Mini ITX" and the CPU Socket Type - "FM2".

That list should be what you're looking for.  The form factor is set to "Micro ATX and Mini ITX", which is the size of the motherboard that will fit into the case.  The cpu socket type is set to "FM2", since the CPU you listed is an FM2 socket.

Question 6

Do the front and top have some kind of dust filter to prevent dust intake?

Accepted Answer

The front has a fairly small woven mesh grate that should prevent some dust intake.  It's not a filter though that you find on top end cases.  The top has standard holes for mounting a fan to allow airflow.  A fan blowing up can easily be mounted there. I'd be more woried about the side panel as far as dust.

Question 7

I'm using a micro atx fm2 motherboard what would be a good CPU heatsink and fan that would fit?

Accepted Answer

i use a Cooler Master Hyper 212 Plus in mine, with the fan pulling air from the cooler and pushing it through the top. It keeps my fx6350 super cool but it also supports fm2 boards. But keep in mind, it BARELY fits; with this configuration, you won't be able to use fans in the top half of the side panel, as the heat pipes almost touch the mesh... But in the end, its a great tower cooler that actually fits.

Question 8

Hey I have a couple questions 1. I just bought 2 80mm case fans for my current case will I be able to use them in this case? and 2. what is the tallest CPU cooler I can fit in this case? I have a the ASrock FM2A55m-VG3+ motherboard

Accepted Answer

the 80mm fans can only go on the side panel, actually up to (4) 80mm fans can go on the side panel or (1) 3200, the front , top, rear will only take 120mm fans. I have 1 3200mm and 3 120mm in my case with a fan controller and it stays pretty cool. Can't help with the proc. I dont know. it seems pretty roomy but its a mini. hope I have helped just a little

Question 9

What are the dimensions of the case?

Accepted Answer

If you click the "Specifications" tab above, you will see the dimensions.  16.3" x 7.3" x 14.6".

Question 10

How big of a graphics card could you fit in this?

Accepted Answer

I just took a rough measurement, 15" x 5" . 5 inches with no fans on the side panel that is.  http://youtu.be/0BdlksfYg8c

Questions & Answers