With the best of Energy's technologies, the Take Classic can fill your room with hair-rising effects and theater-like sound. It includes a powerful 200-watt subwoofer with a front-firing port, 8-inch driver and Ribbed Elliptical Surround for bass that you feel as much as hear. The Convergent Source Module (CSM), with its 3-inch poly-titanium woofer and .75-inch hyperbolic aluminum-dome tweeter, focuses sound for clearer dialogue and stirring music. The CSM gives soundtracks a dynamic frequency range and a huge soundstage, for smooth, realistic sound from each satellite speaker and the center channel. Music and movie lovers rejoice! Take Classic puts the passion back into your favorite films.

The 5.1 Channel Speaker System reproduces the entire audio range in a uniform manner. By ensuring that no one frequency dominates any other, Energy ensures that every note is the way it was intended to be - and the sound as natural as possible.

Sound at all frequencies radiating from the speaker is in an even pattern, in all directions throughout the room.

Other speaker systems are distortion- or resonance-free, but Energy has achieved a significantly lower distortion level, a clearly audible improvement.

Keyhole slots, threaded inserts and rubber bumpers let you choose how and where to place your speakers.

The center channel speaker needs to be centrally located so that the dialogue appears to be coming from the center of the screen. It needs to be above or below the monitor, as closely to it as possible. If you're using a rear projection television, the most likely option is to place it above the screen. If you have a front projection system, you have choices stand mounting, or placement on furniture, for example. It is important, though, to place the speaker so that its front edge is even with the edge of the shelf or stand supporting it. Unwanted diffraction occurs when the center channel is too far back into a cabinet or other surface with edges that could impede sound dispersion.

For left or right front channels, the distance between the speakers should be 6-8 feet at minimum for the best stereo imaging. The optimum room shape is rectangular, with the speakers along one of the shorter walls, facing the opposite side. If possible, do not place speakers against a wall or at rear of a bookshelf; corner placement is usually the worst option. For best results mounting on a rear wall, position the speakers so they flank the main listening area and point toward the front of the room. They should be raised to a height of approximately six feet and should ideally have a space of six feet between them.

The three most common subwoofer locations include corners (which can result in boomy or exaggerated low frequency response), placement along a wall, away from the corner (producing moderate bass performance with increased fidelity over corner placement), or beside a front speaker (creating a better blend with the front speaker, but sacrificing overall volume). Experimentation with subwoofer placement is highly encouraged; slight adjustments can create big differences in sound reproduction. To test subwoofer placement, install it temporarily in your main listening position and walk around the listening room while playing a familiar piece of music until you find the best sounding position.