SIIG SC-SA0H12-S1 3.5" to Dual 2.5" Drive Bay Adapter

Pros: fit two laptop 2.5" drives with no problem. Comes with all the screws that you could ever need to install.

Cons: fails to make me a sandwich, SIIG has had no response to my pleas for a firmware upgrade to enable this feature.

Other Thoughts: Its plastic, which is better than metal in this case. Metal conducts and holds onto heat, plastic not as much. But you do have to be a little bit more delicate with it.

Pros: My SSD fit inside of the adapter itself.

Cons: The adapter with SSD was too wide to fit in my drive bay. When inserted with more force, the adapter would fit but would bow down and touch the HDD's underneath.

Inserting it into another bay had the same issue.

Other Thoughts: 2/5 only because it is technically functional, but looks hideous and will probably wear quickly because of how it sits.

Would not recommend.

Pros: Does the job intended, easy to install and could fit my dual ssd raid with only one bay

Cons: none

Other Thoughts: if you mount two drives you want straight SATA cables not angles ones

Pros: Worked as expected

Cons: somewhat cheap build but it works

Pros: Sufficient. Fits two 2.5" drives into a single 3.5" bay. Nice space saver.

Cons: If both 2.5" slots are filled, right angle SATA cables will not work on both drives. Either both need to be straight, or one straight and one right angle.

Other Thoughts: This is a good product, don't get me wrong. It would just be nice if there was a little more space between the two drives.

Pros: They fit.

Cons: Plastic instead of metal, but for the price, it's right.

Pros: It does what it advertises. I used it in the removable drive bay of a coolermaster stacker 830 case to hold two ssd hdd's in raid. I had no problems lining up holes.

Being plastic, I assume it's possible to modify it as needed for your application.

Cons: It's plastic... be careful. It's a little flimsy, and you can easily strip the holes that the screws thread into.

Pros: Works as advertised
holds my old hdd from laptop along with ssd beneath it
perfect for ssd's

Cons: I'd be concerned if i was using two hdd's because of the heat issue with them being so close

Pros: It holds two 2.5 drives just fine.

Cons: Not a fan of the plastic. The screw holes are not tapped so you have to be very careful putting in the mounting screws as not to over tighten.

Pros: It totally allows you to mount a 2.5" drive in a 3.5" slot.
There are holes on the sides and bottom to mount using the different screw holes.

Cons: It's a cheap plastic.