Evercool VC-EC7010M12C-B 70x70x10mm Video Card Cooling Fan

Pros: None

Cons: I don't think it runs at the rated RPM. Seems like at highest setting on the fan controller, it really isn't moving much air.

Other Thoughts: Like a lot of the others, I ignored the warning signs and bought this to replace my stock fan for my Diamond HD7850 that had a cheap plastic, brittle fan. My knuckle barely grazed the fan at 20% speed and blades snapped off while I was trying to find a vibration. This fan won't line up with the screw holes. Had to carefully drill new holes for it to mount. After mounting, the card runs hotter at idle and under load as opposed to stock. *sigh* my fault

Pros: Cheep and simple as well, hard to find.

Cons: Doesn't work for AMD 5670. Same reason with the person had with the 5770. Had put one screw and took the metal brace off to make sure it spins. It does does it job and keeping card cool... Oh yeh, the pin is TOO big. Had to plug the fan into the PSU with a 3-pin to Molex (the big four big thing)

Pros: I'm sure it would have been an excellent fan if I could use it.

Cons: Got this for my GPU which is a Sapphire Radeon ATI HD5770, was too small, had to drill holes for screws, got the screws in only to find that the fan's plug didn't fit the connector.

Other Thoughts: DO NOT GET THIS FOR A SAPPHIRE ATI RADEON HD5770. IT WILL NOT FIT.

Pros: The fan would have worked well if it had arrived in one piece.

Cons: The fan arrived with a broken blade.

Other Thoughts: The company should try to package their products better. The packaging is flimsy and badly designed. There is too much room for the product to bounce around and a few narrow cracks where the products can easily break during shipping/handling.

Pros: Old fan is noisy and shaking...very quite, finally I can sleep leaving the PC on.

Cons: Not a single screws come with it, lucky I have some.
It's smaller then the HD 5770 fan but I want 3500RMP, 80x80x10mm would fit better but only 3000RMP.
Holes don't line up, gotta drew 2 holes

Pros: Great little fans. I have an MSI N460 GTX Hawk talon attack and I broke some fan blades on it. I ordered these to replace them and superglued them to the cooler. They actually cool the gpu better than the fans that came stock on the Twin Frozr II, despite being smaller fans.

Cons: none

Pros: -Very, Very fast
-Silent
-Decent Cooling

Cons: -Nothings Included (no screws, no glue, no etc.)
-I don't quite understand the screw hole measurements that Evercool uses for there replacement fans. Neither this nor the 80x80x10mm fan, have a screw hole that fits the Radeon HD4850 or HD4870.
-Also the power wire does not fit the intended slot on the graphic card. (see other thoughts for possible solutions)

Other Thoughts: -I Jury rigd the fan by tightly screwing down only one hole and using double sided tape on the back to keep it attached to the card.
-I simply plugged the power cord into a chassis fan slot, on my motherboard. This makes me think that this fan was intended to be mounted to a case.... but how, and with what???

Pros: I never got to use it. I do not know if it has pros.

Cons: The screw holes do not line up with the stock heatsink of my 4850. They are incredibly close together on this fan.

Other Thoughts: You should probably just buy a new heatsink. I've wasted my time and money trying to replace just the fans.