Enzotech BCC9 VGA Cooler

Pros: thermal tape, not glue

Cons: They don't install themselves....and they're rather expensive.

Other Thoughts: If you need memory heatsinks for your graphics card....get these. They will actually stay attached...unlike the thermal "adhesive" that another company includes in their GPU cooler kits and supposedly takes 5hrs to "Setup" but doesn't hold...

Pros: 5 eggs besides my luck on the 3M adhesive not sticking as well as I'd hoped on a few of the chips. Besides that, couldn't have hoped for a better cooling solution.

Cons: None yet!

Pros: -Keep the memory modules on my 6870 cool, even with OC.
-Very easy to put on and they hold well.

Cons: -Not the most attractive looking.
-Some higher end cards/motherboards have more than 8 modules so you would need to purchase two of these.

Other Thoughts: -Purchased these for my Sapphire HD6870 after buying a universal waterblock. The waterblock only covers the processor so I needed a way to keep the modules cool and these do an excellent job of it.

Pros: They're small, and work as advertised.

Cons: A bit on the expensive side for what you get though. I think it should either be a little bit cheaper, or more than 8 should be included. But this is just my view of it anyway.

Other Thoughts: I bought this originally for a GPU I used to have (HIS Radeon HD 7850), but I ended up RMA'ing it before I got the heatsinks. The new GPU I have (MSI Radeon HD 7850) has it's own heatspreader on the VRAM, so I originally thought these would be useless, but this wasn't the case. These heatsinks can be used on pretty much any chip :)

I was able to stick one on my sound card (ASUS Xonar DG), and the rest on my CPU MOSFETs. Enzotech has another product specifically for MOSFETs though, and I would recommend using those instead of this product. but I didn't have any real problem with installing these on my MOSFETs on my motherboard (Biostar A880G+). Only risk in this case would be the heatsinks falling off, since the MOSFETs don't cover the entire area of the thermal pad, but so far after a week or two, they're still on pretty securely. If they did fall off though, they would land straight on the GPU (in my case), or any PCI cards you have. And since copper appears to conduct electricity a bit better than other metals, it would probably be bad news...

I would also imagine these can be used in other products as well without any problem. Most wireless routers (that I've seen) do generate a good bit of heat. I would imagine these heatsinks would help out nicely with that.

Pros: Simple, efficient design.
Copper for excellent heat transfer.
Thermal tape is included.

Cons: Sometimes hard to peel the backing paper without pulling the tape off of the bottom of the heasink.

Other Thoughts: Used four of these on the southbridge (ICH) chip on an Intel mini-ITX board.
They're keeping the heat down and saving the board from thermal failure.

Pros: Cools down mosfets on motherboard or ram on video cards. Make sure u clean the area off two to three times with 91% or 99% isopropyl alcohol first before applying the heatsinks. Also hold the heatsink on the area for 10-15 secs to ensure the tape bonds well.

Cons: None

Pros: Everything! I replaced the heat sinks on both ATI HD6870 graphics cards and the heat sinks that came with the aftermarket cooler didn't work right. These are SUPER EASY to install (less than 5 minutes once you have the heat sink off) and don't fall off. They allowed me to OC the RAM as well as the processor without any problems.

Cons: None, but if they were cheaper that would always be better.

Pros: Stick nicely and firmly to well cleaned surface.
Temperature went from 45 Degrees to 36 which is great and the price is right. Look very nice and its pure copper after all so you can't go wrong with these.

Cons: None

Pros: Extremely efficient little cooler for my old video card. Used them for several years for lots more than the video card[s]. Nice for sticking on MoBo regulators too.

Cons: Cons? Hummm? What's to Con? Nothing.

Other Thoughts: These little things could use a little tiny fan for more power! That's a joke, but Who Knows...

Pros: Everything about this product is the best. I've installed it and been using it for a few months and wow.

Cons: There are none.

Other Thoughts: This helped boost my thetan levels to almost double. Ron would be proud! NewEgg once again thanks for delivering such a great product!