• $69.35
  • Free 30-day Returns
  • Sold by Roillnekyer

    Shipped by Roillnekyer

    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White

    • CLICK! YOU WILL LOVE IT: The snap-fit cover locks on with one confident press. That satisfying click is how you know the channel is sealed tight. Pop it off just as easily whenever you need to add, remove, or swap a cable. No jamming, no cracking, no tools. Just open, route, click, done.
    • THE ONLY KIT YOU NEED FOR THE WHOLE ROOM: Most cord hider kits run out at 10 to 13 feet, leaving you short and frustrated. This 315 inch cable hider includes 20 self-adhesive channels, each 16 inches long, that connect piece by piece like Tetris blocks. Straight connectors, inside corners, outside corners, and T connectors lock everything together to fit any wall layout. One cable management kit, one purchase, nothing else to buy.
    • PEEL, PRESS, DONE: Each cord cover channel comes ready to install right out of the box. Peel the backing, press to your wall, move on. Need a stronger hold? Screws and anchors are included too. You pick the method, we provide both.
    • RENTER AND HOMEOWNER FRIENDLY, BUILT TO LAST: This A+ cable concealer is made to serve your home for years. The adhesive holds channels firmly in place and the material will not yellow or warp over time. If you ever need to remove a section, gentle warm air from a hair dryer softens the bond and lets you peel it off without damaging your wall.
    +
    +
    Overview
    Specs
    Reviews
    avatar

    Any questions? Our AI beta will help you find out quickly.

    cord cover

    HOW TO USE?

    cord cover

    PEEL THE TAPE

    Make sure the wall surface is clean and dry before mounting. Dust or moisture will reduce adhesive strength, so wipe the surface first.

    cord cover

    STICK TO THE WALL

    Align the raceway along your desired path and press firmly against the wall for 30 seconds. Start from one end and work your way across.

    cord cover

    INSERT CABLES

    Lay your cables inside the channel. Use the included corner, T-shape and joining pieces wherever the raceway turns, splits or connects.

    cord cover

    SNAP ON THE COVER

    Click! Snap the cover into place and you're all set. Need to add a cable later? Just pop it open anytime, no tools needed.

    Clean Setup. No More Cable Chaos.

    You didn’t spend all that money on a beautiful setup just to stare at tangled cables running down your wall. Your space deserves to look clean, and that starts with hiding the cords. The A+ Cable Raceway Kit includes 20 channels for up to 26 feet of coverage. With straight, corner, and T connectors, create a seamless path from your TV to the baseboard and beyond. One kit. One purchase. Nothing else to buy.

    cord cover

    WHAT’S INCLUDED IN THE KIT?

    cord cover

    ALL-IN-ONE FULL KIT

    cord cover

    20PCS 16” RACEWAY

    cord cover

    CONNECTORS & CORNERS

    cord cover

    USER MANUAL & OPTIONAL SCREWS

    cord cover

    CLICK. Snap It. Done.

    Every channel comes with pre-applied adhesive. Peel, press, done. Need extra hold? Screws and drywall anchors are included. Snap-fit covers click into place and remove easily for changes. The smooth white finish is paintable to match any wall. Run along baseboards, walls, or ceilings and cut to size. No tools needed. Keeps cords out of reach, making your space safer, cleaner, and easier to live with.

    • Yes! Each raceway includes high-quality double-sided adhesive tape that bonds firmly to your wall. Note: heavily textured surfaces may reduce adhesive performance. In that case, simply use the included screws and anchors for a permanent hold.

    • Each raceway comfortably fits 3 to 4 standard cables; thinner cables like speaker wire can go up to 5. With over 10 years of experience in cable management, we designed this size to be the sweet spot for most home and office setups.

    • Let's be honest: textured surfaces reduce the area the tape can grip. It works in about 90% of cases, but adhesion may vary. No worries though, the included screws and wall anchors give you a rock-solid mount on any surface.

    • Absolutely! Most customers use them as-is in white, but our raceways are made from paint-friendly PVC. Whether you prefer a brush or spray can, you can easily match any wall color for a seamless, built-in look.

    • 315 inches is about 26 feet, the longest kit in the category, and more than enough for a standard living room TV setup. For larger spaces, two kits connect seamlessly, and every box includes all the corner and joining pieces you need.

    cord cover

    HOW TO USE?

    cord cover

    PEEL THE TAPE

    Make sure the wall surface is clean and dry before mounting. Dust or moisture will reduce adhesive strength, so wipe the surface first.

    cord cover

    STICK TO THE WALL

    Align the raceway along your desired path and press firmly against the wall for 30 seconds. Start from one end and work your way across.

    cord cover

    INSERT CABLES

    Lay your cables inside the channel. Use the included corner, T-shape and joining pieces wherever the raceway turns, splits or connects.

    cord cover

    SNAP ON THE COVER

    Click! Snap the cover into place and you're all set. Need to add a cable later? Just pop it open anytime, no tools needed.

    cord cover

    Clean Setup. No More Cable Chaos.

    You didn’t spend all that money on a beautiful setup just to stare at tangled cables running down your wall. Your space deserves to look clean, and that starts with hiding the cords. The A+ Cable Raceway Kit includes 20 channels for up to 26 feet of coverage. With straight, corner, and T connectors, create a seamless path from your TV to the baseboard and beyond. One kit. One purchase. Nothing else to buy.

    WHAT’S INCLUDED IN THE KIT?

    cord cover

    ALL-IN-ONE FULL KIT

    cord cover

    20PCS 16” RACEWAY

    cord cover

    CONNECTORS & CORNERS

    cord cover

    USER MANUAL & OPTIONAL SCREWS

    cord cover

    CLICK. Snap It. Done.

    Every channel comes with pre-applied adhesive. Peel, press, done. Need extra hold? Screws and drywall anchors are included. Snap-fit covers click into place and remove easily for changes. The smooth white finish is paintable to match any wall. Run along baseboards, walls, or ceilings and cut to size. No tools needed. Keeps cords out of reach, making your space safer, cleaner, and easier to live with.

    • Yes! Each raceway includes high-quality double-sided adhesive tape that bonds firmly to your wall. Note: heavily textured surfaces may reduce adhesive performance. In that case, simply use the included screws and anchors for a permanent hold.

    • Each raceway comfortably fits 3 to 4 standard cables; thinner cables like speaker wire can go up to 5. With over 10 years of experience in cable management, we designed this size to be the sweet spot for most home and office setups.

    • Let's be honest: textured surfaces reduce the area the tape can grip. It works in about 90% of cases, but adhesion may vary. No worries though, the included screws and wall anchors give you a rock-solid mount on any surface.

    • Absolutely! Most customers use them as-is in white, but our raceways are made from paint-friendly PVC. Whether you prefer a brush or spray can, you can easily match any wall color for a seamless, built-in look.

    • 315 inches is about 26 feet, the longest kit in the category, and more than enough for a standard living room TV setup. For larger spaces, two kits connect seamlessly, and every box includes all the corner and joining pieces you need.

    Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...