Meet Your Seller
ACROSSXD Double Sided PEI Build Plate 257x257mm, Smooth and Textured Flexible Spring Steel Sheet, Compatible with Bambu X1C, X1, X1E, P1P, P1S, P2S, X2D and A1, Fits Magnetic Heated Beds
- TWO FINISHES, ONE PLATE: Textured PEI grips the first layer for glue-free adhesion on large, warp-prone parts; smooth PEI gives display models a clean glossy bottom. Flip the sheet to switch finishes instead of buying a second build plate.
- FITS BAMBU LAB 256x256 MM PRINTERS: 257x257mm sheet for X1C, X1, X1E, P1P, P1S, P2S, X2D and A1. Not for A1 mini, A2L or H2 series. On P2S and X2D, turn off Build Plate Detection if the printer reports an unrecognized plate.
- STRONG GRIP, EASY RELEASE: The PEI surface holds prints firmly while hot, then lets go once the bed cools to 35°C or below. Gently flex the spring steel core to pop parts off without scrapers, and it springs back flat for the next print.
- BUILT FOR EVERYDAY HEATED BED USE: PEI powder coating is rated up to 300°C on the textured face and 200°C on the smooth face and withstands repeated heating cycles. Print PLA, PETG, TPU, ABS, ASA, PA, PC and Nylon at your printer's normal bed settings.
- SIMPLE SETUP AND CARE: Peel the smooth side film before use. PLA prints on either side; on the smooth side, use a thin glue stick layer for PETG, ABS, ASA, PC and Nylon. Re-run auto leveling after flipping, wipe with mild detergent, never acetone. Includes 1 plate.
Any questions? Ask CelesteSM will help you find out quickly.
1.Two surfaces, one plate. The ACROSSXD dual texture PEI build plate puts a textured PEI face and a smooth PEI face on the same flexible spring steel sheet. Use the textured side when first layer grip matters most, or flip to the smooth side when you want a clean, glossy bottom on a display print. Either way the sheet drops onto your printer's magnetic heatbed and lifts off again once the print has cooled. 2.Sized 257x257mm for the 256x256mm Bambu Lab platform: X1C, X1, X1E, P1P, P1S, P2S, X2D and A1. It does not fit the A1 mini, A2L or H2 series. On P2S and X2D, this third party plate has no QR marker, so choose "Resolved" or switch off Build Plate Detection if the printer shows an unrecognized plate warning. 3.Before first use, peel the protective film from the smooth face. PLA prints directly on both faces; on the smooth face, a thin glue stick layer is recommended for PETG, ABS, ASA, PC and Nylon so parts release cleanly. Let the bed cool to 35°C or below, then gently flex the sheet to release the print. Re-run auto bed leveling after flipping, and clean with a soft cloth and mild detergent only, never acetone or strong solvents. 4.In the box: 1 x double sided smooth and textured PEI spring steel build plate.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by YOUCAILI Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















