Alphacool Core Thermal Pad Soft 6.2W/mk 40x40x1mm, Blue (13408)

The Alphacool Core Thermal Pad Soft 6.2W/mk 40x40x1mm is a soft, silicone-based thermal pad, 40 x 40 mm and 1 mm thick, rated 6.2 W/mK (±10%), one pad per pack. It is blue, electrically non-conductive, and can be used to cool electronic components of all kinds. We also stock this thickness as a 100 x 100 mm pad, and more 1.0 mm thermal pads are in their own section.

Properties

• Size (L x W x H): 40 x 40 x 1 mm
• Thickness: 1 mm
• Thermal conductivity: 6.2 W/mK (±10%)
• Hardness: 50 (Shore 00) (±15)
• Working temperature: -50 to ~150 °C
• Pieces in the pack: 1

What it cools

Alphacool calls this its performance thermal pad, for any place where it is essential to effectively dissipate waste heat. In addition to the voltage converters and VRAMs on graphics cards, it suits parts inside Playstation and Xbox game consoles. Alphacool says those parts can also be cooled this way, greatly improving their performance and durability.

Better than standard thermal pads?

The Soft heat conduction pad is characterized, in Alphacool's words, by optimal compressibility. Due to its low hardness and a natural stickiness, Alphacool says, the Core pad adapts perfectly to surfaces. It compensates for unevenness between components and thus ensures what Alphacool calls a significant improvement in heat transfer. The data sheet sums the pad up in five points: high thermal conductivity, low thermal resistance, high compressibility and compliancy, natural tack and good electrical insulation.

Increased service life

Alphacool credits a special material composition that reduces the risk of silicone bleeding. By its account the pad can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.

Versatile use

Alphacool describes the electrical insulation as excellent. Because the material does not conduct electricity, the same pad can go into electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.

Technical data thermal pad

• Dimensions (L x W x H): 40 x 40 x 1 mm
• Thermal Conductivity (ASTM D5470): 6.2 W/mK (±10%)
• Hardness (ASTM D412): 50 (Shore 00) (±15)
• Working temperature: -50 to ~150 °C
• Volume Resistance (ASTM D257): 1×10¹³ Ohm-m
• Dielectric Breakdown Voltage (ASTM D149): 6 KV/mm (±10%)
• Density (ASTM D792): 3.1 g/cm³ (±10%)
• Elongation (ASTM D412): 50%
• Weight Loss (ASTM E595): less than 1%
• Flame Rating (UL 94): V-0
• Color: blue