Alphacool Core RX 9070 XT Aorus Elite with Backplate (14780)

The Alphacool Core RX 9070 XT Aorus Elite with Backplate is a GPU water block for two Gigabyte graphics cards with the AMD Radeon RX 9070 XT chip. It fits the AORUS ELITE 16G and the GAMING OC 16G, and cools the card with a chrome-plated copper block under an acrylic top, and the aluminum backplate is in the box.

Properties

• Fits: Gigabyte AORUS Radeon RX 9070 XT ELITE and Radeon RX 9070 XT GAMING OC
• Cold plate: Chrome-plated copper
• Top: Acrylic, transparent
• Ports: 4 x G1/4
• Backplate: Aluminum, 3 mm thick, included
• Lighting: 10 digital aRGB LEDs, 5V

Compatibility

Alphacool lists these cards for this block:

• Gigabyte AORUS Radeon RX 9070 XT ELITE 16G (GV-R9070XTAORUS E-16GD)
• Gigabyte Radeon RX 9070 XT GAMING OC 16G (GV-R9070XTGAMING OC-16GD)

The block was designed for one special PCB layout, and card makers sometimes revise a board so that a cooler no longer fits later models. Before ordering, compare your card and its part number with the pictures in Alphacool's GPU configurator, or look it up in its Compatibility List for AMD cards.

Technical data cooler

• Dimensions total (L x W x H): 224.00 x 139.07 x 33.60 mm
• Material cooler: chrome-plated copper
• Material cooler top: Acrylic
• Material terminal: Nylon
• Material Connection thread: Brass
• Maximum working temperature: 60 °C
• Pressure tested: 0.8 bar
• Threads: 4 x G1/4
• Thickness cooler bottom: 3.25 mm
• Thickness cooling fins: 0.4 mm
• Distance cooling fins: 0.4 mm
• Illumination: digital aRGB LEDs
• Power connector digital aRGB LEDs: 3-Pin JST
• Power digital aRGB LEDs: 5V
• Number of digital aRGB LEDs: 10
• Color: transparent

Technical data backplate

• Dimensions (L x W x H): 224.00 x 110.50 x 6.00 mm
• Thickness backplate without spacers: 3 mm
• Material: Aluminum

Notes

• Alphacool asks that the block be used only with clear transparent water cooling fluids. It warns that the particles and additives in Pastel liquids can clog and permanently damage a radiator, a pump, a cooler or the hoses, and that this can void the manufacturer's warranty.
• Remove the original cooler on an antistatic mat and clean the card of thermal paste and pad residues before fitting the block.

In the box

• 1x Core RX 9070 XT Aorus Elite cooler
• 1x Backplate
• 2x 40x15x1mm Pad
• 1x 30x15x1mm Pad
• 1x 75x8x1mm Pad
• 1x 65x8x1mm Pad
• 2x 8x8x1mm Pad
• 2x 40x8x3mm Pad
• 1x 45x45x3mm Pad
• 1x 30x8x3mm Pad
• 1x Thermal Grease
• 1x Putty tool
• 1x ARGB Adapter
• 1x Plug tool
• 1x Screwdriver
• 2x G1/4 Plug
• 11x M2x10mm screws
• 1x PCI-Bracket
• 1x M3x4mm screw
• 1x Washer
• 1x Nut