Alphacool Eiskoffer - Fitting Stopper

The Alphacool Eiskoffer - Fitting Stopper is a stopper with a set insertion depth, part of Alphacool's Eiskoffer tube bending tools. The depth is 6 mm for tubes with 13 or 12 mm Ø and 11 mm for tubes with 16 mm Ø. One stopper per pack. Alphacool lists it as the ice case starting stop with fitting depth (article number 90351).

Properties

• Insertion depth, 12 or 13 mm tube: 6 mm
• Insertion depth, 16 mm tube: 11 mm
• Depth: Shown with a marking
• Pieces in the pack: 1

How the depth works

The fixed depth is based on the connection depth, or slip depth, for Alphacool Hard-Tube connectors. So this measurement does not need to be added when calculating or transferring dimensions. With another maker's parts, that is if you are not using Alphacool connectors, there are two ways. Either use the straight mandrel with stylus stopper, or calculate the difference using your own connectors.

What a run needs

All Eiskoffer bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm, and the required guide is always aligned downwards.