Alphacool Eisblock XPX Pro AM4 Mounting Screws

The Alphacool AM4 Mounting Screws are a screw set for mounting Alphacool Eisbaer and XPX CPU coolers onto a motherboard with an AMD AM4 socket: four each of AMD screws, compression springs, nuts and washers. The screw set is not compatible with all Alphacool XP³ CPU coolers.

Properties

• Socket: AMD AM4
• For: Alphacool Eisbaer all-in-one systems and XPX coolers
• Pieces in the pack: 4 screws, 4 springs, 4 nuts, 4 washers
• Washers: 0.5 mm

What the set is for

The set includes all the necessary components to mount a wide range of Alphacool CPU coolers securely and reliably. Alphacool says it is specifically designed for a simple yet stable installation. The aim is ensuring optimal contact between the CPU and the cooler, which Alphacool calls a key factor for effective heat transfer. Alphacool names it ideal for users looking to upgrade their system, replace individual components or retrofit their cooling setup.

Compatible to

The set works with all common Alphacool Eisbaer all-in-one CPU water cooling systems as well as the XPX series of coolers. Alphacool lists these:

• Alphacool Eisbaer LT
• Alphacool Eisbaer
• Alphacool Eisbaer Aurora
• Alphacool Eisbaer Pro
• Alphacool XPX
• Alphacool XPX Pro

Check the motherboard first

Important note from Alphacool: it cannot exclude that some AM4 motherboards are not compatible with the mounting frame, so we point to its own check. Please print out the following PDF before you order: the manual linked at the bottom of this page. On it you see the mounting frame in 1:1 format, and you can cut out the frame and put it on your mainboard. Then check whether any surrounding components collide with it.

In the box

• 4x AMD screws
• 4x compression springs
• 4x nuts
• 4x washers 0.5 mm