Alphacool HF 10/8mm G1/4 Compression Fitting - Black (5100340)

The Alphacool HF 10/8mm G1/4 Compression Fitting - Black is a straight brass compression fitting for soft tubing with an outer diameter of 10 mm and an inner diameter of 8 mm, one fitting per pack. It is part of Alphacool's HF series, which Alphacool says sets new standards in functionality and flow performance for water cooling systems.

Properties

• Thread: G1/4, 5 mm long
• Tube size: 10/8 mm (10 mm outer, 8 mm inner diameter)
• Angle: Straight
• Material: Brass (CuZn39Pb3), EPDM seal
• Color: Black
• Pieces in the pack: 1

High flow

Made from robust brass, the high-flow fitting has an optimized inner diameter that reduces flow resistance and allows a high coolant flow rate. Alphacool calls it particularly suitable for performance-oriented custom water cooling systems where unrestricted flow within the loop is a key priority.

Fit and finish

Thanks to the standard G1/4 thread, the fitting can be combined with a wide range of components. Its design is tailored to tubing with an outer diameter of 10 mm and an inner diameter of 8 mm, for a secure fit and reliable sealing. The black finish blends discreetly into a wide variety of water cooling setups, and the compact design allows clean, unobtrusive tube routing in minimalist and more elaborate systems alike.

What a run needs

A tube run takes two fittings, one at each end, each screwed into a G1/4 port. Tubing to match is the Alphacool AlphaTube HF 10/8 Ultra Clear. The same fitting for 11 mm tubing is the Alphacool HF 11mm G1/4 Compression Fitting - Black.

Technical data

• Height: 23.94 mm
• Diameter: 17.15 mm
• Material fitting: Brass (CuZn39Pb3)
• Connection type: Tube connection 10/8 mm
• Thread connection: G1/4
• Thread length: 5 mm
• Seal material: EPDM Shore A 70
• Color: Black

In the box

• 1x Alphacool HF Compression Fitting 10/8mm G1/4 Black