Alphacool Core RX 9070 XT Steel Legend with Backplate (14806)

The Alphacool Core RX 9070 XT Steel Legend with Backplate is a GPU water block for the ASRock AMD Radeon RX 9070 XT Steel Legend 16GB graphics card. It cools the card with a chrome-plated copper block under an acrylic top, and the aluminum backplate is in the box.

Properties

• Fits: ASRock Radeon RX 9070 XT Steel Legend 16GB
• Cold plate: Chrome-plated copper
• Top: Acrylic, transparent
• Ports: 4 x G1/4
• Backplate: Aluminum, 3 mm thick, included
• Lighting: 10 digital aRGB LEDs, 5V

Compatibility

Alphacool lists these cards for this block:

• ASRock AMD Radeon RX 9070 XT Steel Legend 16GB

The cooler was built for one special PCB layout, and a card maker may revise its board slightly so that the block does not fit later models. Before you order, compare your card and its PCB number with the pictures in Alphacool's GPU configurator, or find the card in its Compatibility List for AMD cards.

What the loop needs

The block has four G1/4 connections. Two take the compression fittings for your tube size, which are not in the box, and the other two take the two plugs that are, screwed in with the plug tool. The lighting has a 3-Pin JST power connection and runs at a voltage of 5V, and an ARGB adapter is included. Thermal pads, thermal grease, a putty tool, a screwdriver and the screws also come with the block.

Technical data cooler

• Dimensions total (L x W x H): 200.00 x 127.30 x 33.35 mm
• Material cooler: chrome-plated copper
• Material cooler top: Acrylic
• Material terminal: Nylon
• Material Connection thread: Brass
• Maximum working temperature: 60 °C
• Pressure tested: 0.8 bar
• Threads: 4 x G1/4
• Thickness cooler bottom: 3.25 mm
• Thickness cooling fins: 0.4 mm
• Distance cooling fins: 0.4 mm
• Illumination: digital aRGB LEDs
• Power connector digital aRGB LEDs: 3-Pin JST
• Power digital aRGB LEDs: 5V
• Number of digital aRGB LEDs: 10
• Color: transparent

Technical data backplate

• Dimensions (L x W x H): 200.00 x 98.80 x 6.00 mm
• Thickness backplate without spacers: 3 mm
• Material: Aluminum

Notes

• Alphacool asks that the block be used only with clear transparent water cooling fluids. It warns that the particles and additives in Pastel liquids can clog and permanently damage water cooling products, whether a radiator, a pump, coolers or hoses, and that this can void the manufacturer's warranty.
• Take the original cooler off on an antistatic mat and clean thermal paste and pad residues from the card before the block goes on. The card's original IO shield is installed again with the block. During assembly, make sure taller parts have enough space around them.

In the box

• 1x Core RX 9070 XT Steel Legend cooler
• 1x Backplate
• 2x 40x15x1mm Pad
• 1x 32x15x1mm Pad
• 2x 8x8x1mm Pad
• 1x 66x8x1mm Pad
• 1x 55x8x1mm Pad
• 2x 40x8x3mm Pad
• 1x 45x45x3mm Pad
• 1x 32x8x3mm Pad
• 1x Thermal Grease
• 1x Putty tool
• 1x ARGB Adapter
• 1x Plug tool
• 1x Screwdriver
• 2x G1/4 Plug
• 10x M2x10mm screws
• 1x M3x4mm screw