here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
728 10-in-1 Kit with Tester - CRIMP. TEST. CONNECT
Pass-Through Made Easier — Feed, Verify, Crimp & Trim in One Motion
FROM BARE CABLE TO TESTED CONNECTION
Complete, practical, value-focused network installation kit
What's included in this 10-in-1 kit?
Crimping tool, network cable tester, punch down tool, 2 wire strippers, flush cutter, cable strap, 20 CAT6 pass-through RJ45 plugs, 20 cover boots, 2 extra blades, mini screwdriver, waterproof carry bag
Is this compatible with CAT6 and CAT7 cables?
Yes. Works with pass-through CAT5/5E/6/7/8 RJ45 8P8C plugs and RJ11/RJ12 telephone connectors. Also supports connectors with clamp tail external ground. Fully compatible with industry-standard cables and network setups
Is the build quality good enough for regular use?
High carbon steel blades with nylon/rubber grips. Great value for beginner, Pro workers, IT engineer and DIYers for light pro work Extra replacement blades included
Can a complete beginner use this kit successfully?
Absolutely. Pass-through design lets you verify wire order before crimping—very forgiving. It is for DIY, IT technicians, Home networking, CCTV installers, Small office network work, Field service
Does the network cable tester work reliably?
Works good—quickly identifies breaks, shorts, or incorrect wiring. Quickly detect wiring faults to make your work easier
Everything You Need for Ethernet Cable Installation in One Case
Essential Network Tools
AM-728 makes Ethernet cable crimping fast and easy, while the AM-318B punch down tool is ideal for advanced network cabling, patch panels, and keystone jack termination
Precision Cable Prep Tools
Includes the AM-501B multi-function stripping tool plus a flush cutter for precise trimming, giving you better control for clean, detailed cable preparation and installation work
TEST AFTER CRIMPING
CRIMP, THEN VERIFY — The included LAN/TEL tester helps check cable continuity and wiring order after termination, so you can identify opens, shorts or miswiring before putting the cable into service—saving troubleshooting time later
AMPCOM RJ45 TOOL
728 10-in-1 Kit with Tester - CRIMP. TEST. CONNECT
Pass-Through Made Easier — Feed, Verify, Crimp & Trim in One Motion
FROM BARE CABLE TO TESTED CONNECTION
Complete, practical, value-focused network installation kit
What's included in this 10-in-1 kit?
Crimping tool, network cable tester, punch down tool, 2 wire strippers, flush cutter, cable strap, 20 CAT6 pass-through RJ45 plugs, 20 cover boots, 2 extra blades, mini screwdriver, waterproof carry bag
Is this compatible with CAT6 and CAT7 cables?
Yes. Works with pass-through CAT5/5E/6/7/8 RJ45 8P8C plugs and RJ11/RJ12 telephone connectors. Also supports connectors with clamp tail external ground. Fully compatible with industry-standard cables and network setups
Is the build quality good enough for regular use?
High carbon steel blades with nylon/rubber grips. Great value for beginner, Pro workers, IT engineer and DIYers for light pro work Extra replacement blades included
Can a complete beginner use this kit successfully?
Absolutely. Pass-through design lets you verify wire order before crimping—very forgiving. It is for DIY, IT technicians, Home networking, CCTV installers, Small office network work, Field service
Does the network cable tester work reliably?
Works good—quickly identifies breaks, shorts, or incorrect wiring. Quickly detect wiring faults to make your work easier
Everything You Need for Ethernet Cable Installation in One Case
| RJ45 Crimper (AM-728) | Crimps, cuts and clamps tail clips; works with unshielded & shielded EZ-RJ45 connectors for Cat7/Cat6A/Cat6/Cat5E/Cat5. Qty: 1 |
|---|---|
| Punch Down Tool (AM-318B) | Punch and cut, pick, store functions; for patch panels and keystone jacks. Qty: 1 |
| Stripping Tool (AM-501B) | Strips coaxial cable outer sheath and insulation layer; adjustable stripping size. Qty: 1 |
| Mini Punch/Strip Tool | Punches and strips cable outer sheath and insulation layer. Qty: 1 |
| Flush Cut Pliers (AM170BK) | Cuts 16 AWG copper soft wire cleanly. Qty: 1 |
| Cable Strap (AMZD10BK) | 1 meter (3.3 ft), shearable to desired length; for cable organizing. Qty: 1 |
| Cat6 RJ45 Plug (x20) | Pass-through type, 50U gold plating, for Cat6 24–26 AWG; supports T568A/T568B wiring. Qty: 20 |
| RJ45 Strain Relief Boot (x20) | Common type; protects plug-to-cable joint. Qty: 20 |
| Replaceable Blade (x2) | Extra blade reserve for the AM-728 crimping tool. Qty: 2 |
| Mini Screwdriver | Adjusts the 8P mode (Cat5–Cat7) on the AM-728 crimper; fits all its screws. Qty: 1 |
| EVA Square Zipper Bag | Outer PU, inner velvet; storage, carry, water and corrosion resistance. Qty: 1 |
| LAN/TEL Tester (WAMCRD) | Detects LAN/TEL continuity; works with RJ45/RJ11/RJ12, Cat5e/6/6A/7/8, UTP & STP. Qty: 1 |
Essential Network Tools
AM-728 makes Ethernet cable crimping fast and easy, while the AM-318B punch down tool is ideal for advanced network cabling, patch panels, and keystone jack termination
Precision Cable Prep Tools
Includes the AM-501B multi-function stripping tool plus a flush cutter for precise trimming, giving you better control for clean, detailed cable preparation and installation work
TEST AFTER CRIMPING
CRIMP, THEN VERIFY — The included LAN/TEL tester helps check cable continuity and wiring order after termination, so you can identify opens, shorts or miswiring before putting the cable into service—saving troubleshooting time later
