Installation:
- 1. Take out the mist maker and AC/DC adaptor, connect the DC plug.
- 2. Install the mist maker under water depth 2-2.8 inches (Best working water level: 0.6inch between mist maker sensor and water surface) and plug-in the adpator.
- 3. There is a cable cap on the power cord, adjustable, thats for prevent mist gathered into water droplets, flows out and affect other devices.
Application
PULACO Mist Maker, using ultrasonic electronic technology to make the water molecules into fog molecules.smelless and colorless. Perfects for being used in your pond, botanical garden, rockery, fishtank, vase, pool.,etc. It will create a magical atmosphere. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.
Baffle
Prevent water splash out from the water tank,
If you are not worrying about the water drops, please remove the baffle, this can help the mist maker create more mist, and get better mist performance.
Attention & Maintenance:
- 1. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
- 2. Do not put your hands cover above the centre mist while it working, it may causing discomfort.
- 3. For the good of mist make performance and service, please change clean water in every week, and use soft cloth to cleam the mist maker sensor and head, do not use chemical liquid cleaner.
- 5. Do not scratch the mist maker sensor or head with sharp tools.
- 6. For your safety concerns, please plug off when you want to stop the mist maker for a long time. (Please ensure that the daily running time is less than 8 hours, otherwise the life of atomizing slice will be shorted. )
Installation:
- 1. Take out the mist maker and AC/DC adaptor, connect the DC plug.
- 2. Install the mist maker under water depth 2-2.8 inches (Best working water level: 0.6inch between mist maker sensor and water surface) and plug-in the adpator.
- 3. There is a cable cap on the power cord, adjustable, thats for prevent mist gathered into water droplets, flows out and affect other devices.
Application
PULACO Mist Maker, using ultrasonic electronic technology to make the water molecules into fog molecules.smelless and colorless. Perfects for being used in your pond, botanical garden, rockery, fishtank, vase, pool.,etc. It will create a magical atmosphere. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.
Baffle
Prevent water splash out from the water tank,
If you are not worrying about the water drops, please remove the baffle, this can help the mist maker create more mist, and get better mist performance.
Attention & Maintenance:
- 1. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
- 2. Do not put your hands cover above the centre mist while it working, it may causing discomfort.
- 3. For the good of mist make performance and service, please change clean water in every week, and use soft cloth to cleam the mist maker sensor and head, do not use chemical liquid cleaner.
- 5. Do not scratch the mist maker sensor or head with sharp tools.
- 6. For your safety concerns, please plug off when you want to stop the mist maker for a long time. (Please ensure that the daily running time is less than 8 hours, otherwise the life of atomizing slice will be shorted. )