Anycubic Kobra S1 Max Combo | Fully Enclosed, 4-Color 3D Printer | ACE 2 Pro, 600mm/s CoreXY, Auto-Leveling, AI Camera

The Anycubic Kobra S1 Max Combo is a large format, fully-enclosed CoreXY 3D printer built for big, multicolor and engineering-grade projects. Its 350 x 350 x 350mm print volume is 174% larger than the Kobra S1, so helmets, footwear, cosplay pieces and functional parts can be printed in one piece, ready to go right off the plate.

Multicolor printing is handled by the included ACE 2 Pro, which starts at 4 colors and can be expanded to 16-color printing by combining four ACE 2 PRO units. Four independent brushless motors and an upgraded buffer keep feeding smooth, filament loading is 100% faster than the first-generation ACE Pro, and 65°C drying while printing keeps filament fresh. A real-time temperature and humidity display shows conditions at a glance.

For demanding materials, the S1 Max pairs 65°C active chamber heating with a 350°C hotend and a 120°C PEI spring steel bed. A hardened steel nozzle, hardened steel extruder gears and a titanium alloy throat tube handle carbon-fiber filaments. Supported materials include PLA, PETG, TPU (95A), PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF/GF and PET-CF.

Speed reaches up to 600mm/s (300mm/s recommended) with acceleration up to 20,000mm/s². LeviQ 3.0 auto-leveling, pressure advance and flow calibration, power loss resume, filament detection and entanglement detection help every job finish cleanly, while a 720P camera with AI spaghetti detection alerts you to failures. It arrives 95% pre-assembled for printing in about 10 minutes.

Control prints from the 4.3" touchscreen, Anycubic Slicer Next or the Anycubic App over dual-band Wi-Fi 6, Ethernet or LAN. A quick-release hotend (0.4mm and 0.6mm hardened steel nozzles included), activated carbon filter and quiet mode as low as 45dB round out a capable large format 3D printer for makers and small businesses.