Anycubic Water-Wash Resin 2.0 | Gray, 1kg | Water Washable 405nm UV 3D Printer Resin, No IPA Needed

Anycubic Water-Wash Resin 2.0 Grey for LCD/DLP 3D Printers, 1kg Bottle

Anycubic Water-Wash Resin 2.0 is a water-washable UV photopolymer resin that makes resin 3D printing cleaner, simpler, and more affordable. Its hydrophilic formulation lets you remove residual resin from prints with plain water, so there is no need to buy, store, or handle isopropyl alcohol (IPA). The result is a safer, lower-cost, and more eco-friendly workflow that does not compromise print quality.

Print quality is built for detail. With 0.15mm surface precision and low shrinkage, this resin captures the intricate features demanded by miniatures, tabletop figures, and other highly detailed models. Cured prints are also durable: elongation at break of 16-22% and an Izod impact strength of 133 J/m help models resist fractures and cracks. An optimized formula reduces water absorption, so models hold their vivid colors and structural integrity over long-term display.

The resin maintains low viscosity even at 15-20°C, delivering smooth flow, consistent build plate adhesion, and stable, high success rates in unheated or cooler rooms. A recommended normal exposure of just 2-2.5 seconds keeps print times short, and the minimal-odor formula creates a more pleasant printing environment.

This 1kg bottle of Gray Water-Wash Resin 2.0 is compatible with all LCD/DLP 3D printers that use 405nm UV light-curing technology and works best with Anycubic printers. Wash parts in water for at least 5 minutes, dry them fully, then post-cure for about 3 minutes. Do not pour wash water down the drain; let it cure in sunlight and dispose of it as solid plastic waste. It is ideal for anime and game figurines, architectural models, and appearance and structural prototypes.