Q: Can I use this for sump pump ? It needs 12 amps for full load ?

This is a UPS-Battery Backup which protects electronic gear from power surges and brief power outages. If you put this in your sump, you will turn it into a boat anchor.

Q: major difference between Br1500G and BX 1500M?

There are several differences but one major one for me is that the BR can accept an external battery (BR24BPG) which essentially triples run time while the BX model cannot accept an external battery. Yes, the BR is more money but IMO it's worth it.

Q: How quiet is this UPS, have you measured it with a decibel meter?

It only makes noise when running on battery. I haven't noticed it at all when power was available.

Q: does this run on battery power for 10 hours or more?

From the specifications: The built-in battery provides up to 13 minutes of runtime at half load or 3 minutes at full load, so you can properly shut down your system in instances of extended length power outages. So if your power supply is rated at 400 watts and you have a 24" led (usual draw is around 40 watts) also connected, it will run for 13 minutes. Hope this helps!

Q: Does this unit provide Sine wave or Simulated Signwave output? Curious if this is compatible with my power supply unit.

Its a stepped simulated approximation sinewave, It should be compatible with most computer power supplies (although more sensitive electronics lab equipment may notice a difference) None of the computers I have connected to it have indicated any issue. Most battery backups need to simulate the output wave (either output a square, saw, or stepped sign wave) due to the issues converting the DC battery output to AC sine waves.

Q: I would like to confirm that this is a legit copy and not a chinese one. Can you show me a picture of the serial number? Thank you, very excited to purchase.

It is legit. I don't think you will find anyone really willing to take a picture of the serial number as that would be like posting your driver's license on the internet.

Q: One reviewer mentioned he successfully used this UPS with an Active PFC power supply. Can anyone else confirm this? My home server has a Corsair CX500 power supply, which is what I'd like to use with this UPS.

Yes I am doing it right now myself. Although the first one that was sent to me was defective and needed to RMA it. The second one seems to be working fine for now. I have had it for just over 1 week since I have received the replacement unit.

Question 1

How old is the battery on the new units? Manufacturer said they could be as old as two years when buying new. Is that true?

Accepted Answer

Going completely from memory, I thought I saw 5 months had elapsed from the time of manufacture to the time it is on my desk.

The units arrive with a printout of test data and various info taped to the side, looks like a cash register receipt.

Should point out that UPS batteries do not last as long as car batteries, and if the temperature gets higher (like 90F at work, I cannot change that), the batteries last even less, I am lucky to get two years at work. You will most likely need to buy a replacement in the future.

You would do well to buy from a high volume dealer, that hopefully does first-in first out just-in-time inventory. Newegg is high volume.

I have had a bad instance with when buying replacement APC batteries for work, but I cannot recall the seller. It was not Newegg. An internet search will give you various companies that sell replacement batteries.

Question 2

My gaming system has a 1200 watt power supply. Is this an acceptable unit to use or do I need to consider a better unit? I only need enough time to properly shut down my equipment during an outage

Accepted Answer

It is less about how many watts your power supply is capable of outputting and more about what hardware you actually have in your PC. I have an i7-4790K, two GTX 780Tis in SLI, and the normal accessories (everything stock speeds). A quick Google search for "pc power supply calculator" yielded several results which all suggest my PC probably uses around 725 watts under load. This seems about right as I had done my own power consumption test on my previous single GPU rig (i7, GTX 580) and that was around 578 watts under load.

Another Google search for "ups runtime calculator" got a few hits that suggestion a 1500VA ups will last close to 6 minutes under a 725 watt load. If your rig is only single GPU and not super high-end then I would assume you would get 12-15 minutes under full load. If you have your monitor(s) plugged into the battery as well then don't forget to add them in to the runtime calculation. My single 28" LCD monitor says it uses "<60w" so I say call that 60 watts.

TL:DR

This UPS should power a single GPU PC at full load with no overclocking and an LCD monitor on battery for 10 minutes or more. Under non-gaming load you will probably get double that.

Question 3

Can I use this for sump pump ? It needs 12 amps for full load ?

Accepted Answer

This is a UPS-Battery Backup which protects electronic gear from power surges and brief power outages.
If you put this in your sump, you will turn it into a boat anchor.

Question 4

major difference between Br1500G  and BX 1500M?

Accepted Answer

There are several differences but one major one for me is that the BR can accept an external battery (BR24BPG) which essentially triples run time while the BX model cannot accept an external battery.   Yes, the BR is more money but IMO it's worth it.

Question 5

How quiet is this UPS, have you measured it with a decibel meter?

Accepted Answer

It only makes noise when running on battery. I haven't noticed it at all when power was available.

Question 6

does this run on battery power for 10 hours or more?

Accepted Answer

From the specifications: The built-in battery provides up to 13 minutes of runtime at half load or 3 minutes at full load, so you can properly shut down your system in instances of extended length power outages.

So if your power supply is rated at 400 watts and you have a 24" led (usual draw is around 40 watts) also connected, it will run for 13 minutes.

Hope this helps!

Question 7

Would this work in countries with 220 volts electric power?

Accepted Answer

NO

Question 8

Does this unit provide Sine wave or Simulated Signwave output? 
Curious if this is compatible with my power supply unit.

Accepted Answer

Its a stepped simulated approximation sinewave, It should be compatible with most computer power supplies (although more sensitive electronics lab equipment may notice a difference)
None of the computers I have connected to it have indicated any issue.
Most battery backups need to simulate the output wave (either output a square, saw, or stepped sign wave) due to the issues converting the DC battery output to AC sine waves.

Question 9

I would like to confirm that this is a legit copy and not a chinese one. Can you show me a picture of the serial number? Thank you, very excited to purchase.

Accepted Answer

It is legit.  I don't think you will find anyone really willing to take a picture of the serial number as that would be like posting your driver's license on the internet.

Question 10

One reviewer mentioned he successfully used this UPS with an Active PFC power supply.  Can anyone else confirm this?

My home server has a Corsair CX500 power supply, which is what I'd like to use with this UPS.

Accepted Answer

Yes I am doing it right now myself. Although the first one that was sent to me was defective and needed to RMA it. The second one seems to be working fine for now. I have had it for just over 1 week since I have received the replacement unit.

Brand	APC
Series	Back-UPS Pro
Model	BR1500G

International Version	120V
Input Frequency	50 / 60 Hz +/- 3 Hz (auto sensing)
Input Connection	NEMA 5-15P

VA Rating	1500 VA
Watts	865 Watts
Output Voltage	120V
Output Frequency	50/60 Hz +/- 3 Hz sync to mains
Outlets	10
Outlet Type	5 x NEMA 5-15R (Battery Backup) 5 x NEMA 5-15R (Surge Protection)

Battery Type	Lead Acid Battery
Battery Run Time	Run Time at Full Load: 3.8 minutes Run Time at Half load: 12.8 minutes
Battery Recharge Time	8 Hours
Battery Replaceable	APCRBC124

Alarms	Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Management Software	YES
Approvals	NOM, TÜV, ENERGY STAR V2.0 (USA)
Rackmountable	Not rack-mountable

Best Sellers

Meet Your Seller

APC BR1500G Back-UPS Pro, 1500VA/865W, Tower, 120V, 10x NEMA 5-15R outlets, AVR, LCD, User Replaceable Battery - Tower - 8 Hour Recharge - 3 Minute Stand-by - 120 V Input - 120 V AC Output

Learn more about the APC BR1500G

Customer Reviews of the APC BR1500G

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Data Line Protection	Cable modem / Video protection, Network line - 10 / 100 / 1000 Base-T Ethernet (2 x RJ-45 connector)
Surge Energy Rating	354 Joules

Temperature	Operation Temperature: 32 - 104°F (0 - 40°C) Storage Temperature: 5 - 113°F (-15 - 45°C)
Humidity	Relative Humidity: 0 - 95 % non-condensing Storage Relative Humidity: 0 - 95 % non-condensing

Dimensions & Weight
Dimensions	11.85" x 4.41" x 15.04"
Weight	26.7 lbs.

Item#: 9SIC1B3KKE1745