Made from premium materials and crafted with the utmost care, CableMod cables and accessories turn ordinary systems into works of art.
90° Pro 12V-2x6 PCIe Cable for ATX 3.1 Ready PSUs — Variant A
The CableMod Pro ModFlex 12V-2x6 StealthSense PCIe Cable is a direct replacement cable for ATX 3.1 power supplies with a native 16-pin 12V-2x6 or 12VHPWR port. Featuring a 90° angled 16-pin 12V-2x6 connector (Variant A) paired with a 16-pin PCIe connector, this cable routes cleanly toward the cooler side of the GPU. Built with 3.4mm Pro-grade wiring and 16AWG conductors supporting up to 600W.
- Made for ATX 3.1 Ready PSUs
- 90° 16-pin 12V-2x6 to 16-pin PCIe 60cm
- StealthSense (Patented) — CableMod StealthSense Technology
- 16AWG Wiring for 600W Support
- Pre-Installed Closed Cable Combs
- ModFlex Paracord sleeving — soft, flexible, wide range of vivid colors
90° 12V-2x6 Connector with StealthSense (Patented)
CableMod's StealthSense (Patented) technology places a hidden bridge inside the 90° 12V-2x6 connector, eliminating the need for exposed sense wires. The result is a cleaner connector finish with no visible bridge on the outside.
16AWG for 600W Power Delivery
The CableMod Pro 12V-2x6 StealthSense PCIe Cable is constructed with quality 16AWG wire to fully support up to 600W of power delivery, enabling you to power your graphics card with confidence.
ModFlex Paracord Sleeving — Soft, Flexible, Vivid
CableMod's ModFlex Paracord sleeving delivers rich color and maximum flexibility for cable routing. This cable comes with pre-installed matching premium closed cable combs, combined with CableMod's community-developed color patterns for a bold, fresh aesthetic in any build.
Compatibility Guide:
- This cable is designed for ATX 3.1 power supplies with a native 12V-2x6 or 12VHPWR power port — verify your PSU before purchasing
- This cable requires one unoccupied 16-pin PCIe port on your PSU
- Ensure the connector is fully plugged into the GPU before powering on
- Not sure if your setup is compatible? Check the compatibility list below
Features:
- Made for ATX 3.1 Ready PSUs
- 90° 16-pin 12V-2x6 to 16-pin PCIe
- StealthSense (Patented) connector technology
- 16AWG wiring — full support for 600W
- Pre-installed closed cable combs
- ModFlex Paracord sleeving — soft, flexible
GPU — Variant A
- The 90° Variant A is designed for GPU ports with the latch facing upwards — cable routes toward the cooler side of the GPU
- If installed in a GPU port with the latch facing downwards, the cable will instead run toward the GPU backplate.
Compatibility List
90° Pro 12V-2x6 PCIe Cable for ATX 3.1 Ready PSUs — Variant A
Made from premium materials and crafted with the utmost care, CableMod cables and accessories turn ordinary systems into works of art.
The CableMod Pro ModFlex 12V-2x6 StealthSense PCIe Cable is a direct replacement cable for ATX 3.1 power supplies with a native 16-pin 12V-2x6 or 12VHPWR port. Featuring a 90° angled 16-pin 12V-2x6 connector (Variant A) paired with a 16-pin PCIe connector, this cable routes cleanly toward the cooler side of the GPU. Built with 3.4mm Pro-grade wiring and 16AWG conductors supporting up to 600W.
- Made for ATX 3.1 Ready PSUs
- 90° 16-pin 12V-2x6 to 16-pin PCIe 60cm
- StealthSense (Patented) — CableMod StealthSense Technology
- 16AWG Wiring for 600W Support
- Pre-Installed Closed Cable Combs
- ModFlex Paracord sleeving — soft, flexible, wide range of vivid colors
90° 12V-2x6 Connector with StealthSense (Patented)
CableMod's StealthSense (Patented) technology places a hidden bridge inside the 90° 12V-2x6 connector, eliminating the need for exposed sense wires. The result is a cleaner connector finish with no visible bridge on the outside.
16AWG for 600W Power Delivery
The CableMod Pro 12V-2x6 StealthSense PCIe Cable is constructed with quality 16AWG wire to fully support up to 600W of power delivery, enabling you to power your graphics card with confidence.
ModFlex Paracord Sleeving — Soft, Flexible, Vivid
CableMod's ModFlex Paracord sleeving delivers rich color and maximum flexibility for cable routing. This cable comes with pre-installed matching premium closed cable combs, combined with CableMod's community-developed color patterns for a bold, fresh aesthetic in any build.
Compatibility Guide:
- This cable is designed for ATX 3.1 power supplies with a native 12V-2x6 or 12VHPWR power port — verify your PSU before purchasing
- This cable requires one unoccupied 16-pin PCIe port on your PSU
- Ensure the connector is fully plugged into the GPU before powering on
- Not sure if your setup is compatible? Check the compatibility list below
Features:
- Made for ATX 3.1 Ready PSUs
- 90° 16-pin 12V-2x6 to 16-pin PCIe
- StealthSense (Patented) connector technology
- 16AWG wiring — full support for 600W
- Pre-installed closed cable combs
- ModFlex Paracord sleeving — soft, flexible
GPU — Variant A
- The 90° Variant A is designed for GPU ports with the latch facing upwards — cable routes toward the cooler side of the GPU
- If installed in a GPU port with the latch facing downwards, the cable will instead run toward the GPU backplate.
Compatibility List
| ATX 3.1 PSUs | With one unoccupied 16-pin 12V-2x6 or 12VHPWR power port |