- Free 30-day Returns
Meet Your Seller
Aquacomputer Aquaero connector 2pol. for Relay output (Aquaero 4) or Power output (Aquaero 5 and 6)
- Connector for connecting cables to the potential-free contact (relay) of the aquaero
- The connector can be attached by means of screw terminals on one cable and is then inserted into the appropriate connector on the aquaero
- Execution bipolar
- Please observe the maximum load capacity of the relay output of the aquaero!
- In the box: 1 x Connector
Any questions? Ask CelesteSM will help you find out quickly.
The Aquacomputer Aquaero Connector 2pol. for Relay Output (Aquaero 4) or Power Output (Aquaero 5 and 6) (53036) is a two-contact plug for connecting cables to an aquaero. It fits the potential-free contact (relay) of the aquaero 3.07 and 4.00, and the additional power outputs of the aquaero 5 and 6.
Properties- Contacts: 2, bipolar
- Cable connection: screw terminals
- For: relay of aquaero 3.07 and 4.00, power outputs of aquaero 5 and 6
One cable is attached to the plug by means of its screw terminals. Then the plug can be inserted into the appropriate connector on the aquaero, the relay contact or a power output.
Matching partsAquacomputer names this plug for the relay of an aquaero 3.07 or 4.00 when it is used with the PS_ON# lead of the 24-pin power connect cable (53047). For the relay output of an aquaero 5 or 6 the matching part is the 3-pole plug for relay output (53080).
Notes- Please observe the maximum load capacity of the relay output of the aquaero.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory



