Question 1

Can this be used as a replacement for the fan on an ARCTIC Freezer 7 Pro? If not, where do I get one?

Accepted Answer

Possibly, however, modifications to the fan will need to be made. I do own the freezer pro 7, however, this fan was used for a build for a friend so I do not have the F9 in front of me. Because both the pro 7 and pro 9 use 92mm fans I believe one could slip the fan off the rubber mounts and make the swap. Both fans appear to spin the same direction (to the right when looking at the label) and appear to have very similar depths. If you're looking for a direct swap without any modifications this fan is not the one.

Side note: without proper tools I would be nervous about my ability to slip both fans out of their rubber mounts.

Question 2

Why does the very limited specifications near the item's pictures state a 6 year warranty when the main specifications page states 2 years warranty?

Accepted Answer

probably because the bullet points appear to have been pulled from a 120mm arctic cooling fan
the fan has a 2 year warranty according to th manufacture
www.arctic.ac/us_en/arctic-f9-pro-679.html

Question 3

I know the mounting pattern is using the 92mm form factor
I am thinking about using this fan (or a stock Intel CPU cooler's fan) in a GPU cooler mod and need to know a few unusual measurements

What is the diameter of the fan blades?

What is the hole pattern for the rubber silencers that attach the 92mm shroud?

What is the measurement from the bottom of the hole for rubber silencers to the bottom of the fan?

Accepted Answer

The diameter of the fan blades is about 3.3 inches (that's partly by eyeball since my micrometer can't get in there without irreversible disassembly).  That one's at best accurate to 1/10 inch, but probably less.

For the pattern, the holes, center to center, again with some eyeballing, are about 4.2 inches apart on a diagonal, and 3.05 inches along one side.  Take that last measurement's 5/100ths with a grain of salt.

The depth of the well in the bottom of the main fan housing in which the rubber silencers are mounted is about .37 inches.  That's pretty accurate, since I could put something in the well to get the depth.

Feel free to ask more questions.

Brand	ARCTIC COOLING
Series	ARCTIC F9 PRO PWM
Model	AFACO-09PP0-GBA01

Fan Counts	1 Fan
Fan Controller	No Controller
Type	Case Fan
Fan Size	93mm
Fan Thickness	34mm
Bearing Type	Fluid Dynamic
RPM	600 - 2000 RPM
Air Flow	39 CFM
Noise Level	0.4 Sone
Color	Black / White

ARCTIC F9 Pro PWM Fluid Dynamic Bearing Case Fan, 92mm PWM Speed Control, 39CFM at 23dBA

Learn more about the ARCTIC COOLING AFACO-09PP0-GBA01

Customer Reviews of the ARCTIC COOLING AFACO-09PP0-GBA01

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16835186075