Meet Your Seller
ARCTIC P12 PWM PST CO - 120 mm Case Fan PWM Sharing Technology (PST) Pressure-optimised Dual Ball Bearing for Computer Heat Dissipation Continuous Operation 200-1800 RPM - Black 1Pack
- OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure.
- JAPANESE DUAL BALL BEARING: The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance.
- MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST CO to run much more efficiently than its predecessors.
- EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature.
- TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.
Any questions? Our AI mode will help you find out quickly.
Feature:
Optimised for Static Pressure
During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST CO is particularly suitable for use on heatsinks and radiators.
More Efficient Technology
The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST CO (0.96 W @ 1800 RPM) to run much more efficiently than its predecessors (F12 PWM PST CO: 2.88 W @ 1350 RPM). This saves energy and lowers the coil temperature without comprimising the performance.
For Continuous Operation
The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
200 to 1800 RPM regulated via PWM
With a wide range of regulation and the PWM Sharing Technology (PST), the P12 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
Strong Cooling Performance
Numerous improvements, suchas an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal tests leveled to 28 dB(A), the new P-fans leftmany competitors behind.
General data(Specification):
- Fan Speed: 200-1800 RPM
- Airflow: 56.3 CFM/95.7 m³/h
- Static Pressure: 2.20 mm/H²O
- Noise Level: 0.3 Sone
- Operating Temperature: 0 - 40 °C
- Control Type: PST
- Connector: 4-Pin-Connector + 4-Pin-Socket
- Fan Bearing: Dual Ball Bearing
- Electric Characteristics
- Typical Voltage: 12 V DC
- Starting Voltage: 3.9 V
- Current/ Voltage: 0.08 A/12 V
- Cable Length: 400 mm
Size & Weight
Length: 120 mm
Width: 120 mm
Height: 25 mm
Weight: 145 g
Package List:
1*ARCTIC P12 PWM PST CO - 120 mm Case Fan
1* Use accessories
1* Use Manual
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- Read full details
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by JustFirst Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















