BANNER QT50UDB 8 M Range Chemical Resistant Ultrasonic Sensor New

QT50U Dual-Discrete Series: Proximity Mode
Range: 200mm to 8m; Input: 10-30V dc
Outputs: 2 Discrete NPN or PNP
2 m (6.5 ft) Cable
Part Number: 02722
Sensing Beam Ultrasonic
Cable Length (m) 2
PC Configurable No
Sensing Mode (General) Proximity
Sensing Mode (Detailed) Time of Flight
Housing Style Rectangular
Device Type Sensor
Primary Housing Material PBT
Input/Output Discrete
Indicator LED(s)
Connection Cable
Analog Resolution/Discrete Repeatability 1
Quick Disconnect Type No QD
Max Sensing Distance (mm) 8000
Minimum Sensing Distance (mm) 200
Sensing Beam Ultrasonic
Power Supply 10-30 V dc
Delay at Power-up (ms) 1500
Adjustments Push Button (s)
Temperature Effect (mm/°C) Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C
Number of Pins 5
Vibration MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage NPN Outputs < 0.2 V at 10 mA; < 0.65 V at 150 mA
Output Saturation Voltage PNP Outputs < 1.2 V at 10 mA; < 1.65 V at 100 mA
Max Discrete (Switched) Output (mA) 150
Discrete (Switched) Outputs 2 NPN/PNP Configurable
Output Protection Protected against short circuit conditions
IP Rating IP67
NEMA Rating NEMA 6P
Storage Temperature (°C) -40 to 90
Max Operating Temperature (°C) 70
Min Operating Temperature (°C) -20
Max Op. Relative Humidity Non-Condensing (%) 100
Warm-up Time (minutes) 15
Minimum Response Time (ms) 100
Rep Rate (ms) 96
Minimum Window Size (mm) 20
Discrete Output Hysteresis (mm) 5
Ultrasonic Frequency (kHz) 75
Max Off-state Leakage Current (µA) 5
Power/Current Consumption (exclusive of load) 100 mA max @ 10 V dc; 40 mA max @ 30 V dc
Supply Protection Circuitry Protected against reverse polarity and transient overvoltages