BANNER QT50ULBQ6 8 M Range Chemical Resistant Ultrason New

QT50U Analog Series: Proximity Mode
Range: 200mm to 8m; Input: 13-30V dc
Outputs: Analog: 0-10V or 4-20mA
5-Pin Euro-Style Quick-Disconnect
Part Number: 02728
 Sensing Beam Ultrasonic
PC Configurable No
Sensing Mode (General) Proximity
Sensing Mode (Detailed) Time of Flight
Housing Style Rectangular
Device Type Sensor
Primary Housing Material PBT
Input/Output Analog
Indicator LED(s)
Connection Integral QD
Analog Output Configuration 0-10 V dc or 4-20 mA
Analog Resolution/Discrete Repeatability 1
Quick Disconnect Type M12 (Euro)
Max Sensing Distance (mm) 8000
Minimum Sensing Distance (mm) 200
Sensing Beam Ultrasonic
Power Supply 13-30 V dc
Delay at Power-up (ms) 1500
Adjustments Push Button (s)
Temperature Effect (mm/°C) Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C
Number of Pins 5
Vibration MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Analog Current Output Rating 1 k? or [(Vcc-5 V)/0.02 A] ?, whichever is lower
Analog Voltage Output Rating 500 O min. load impedance
Output Protection Protected against short circuit conditions
IP Rating IP67
NEMA Rating NEMA 6P
Storage Temperature (°C) -40 to 90
Max Operating Temperature (°C) 70
Min Operating Temperature (°C) -20
Max Op. Relative Humidity Non-Condensing (%) 100
Warm-up Time (minutes) 15
Minimum Response Time (ms) 100
Rep Rate (ms) 96
Analog Linearity (mm) +/- 0.2% of span from 200 to 8000 mm; +/- 0.1 % of span from 500 to 8000 mm (1 mm minimum)
Minimum Window Size (mm) 20
Ultrasonic Frequency (kHz) 75
Power/Current Consumption (exclusive of load) 100 mA max @ 10 V dc; 40 mA max @ 30 V dc
Supply Protection Circuitry Protected against reverse polarity and transient overvoltages