Skip to main content
  • $12.00
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Barrow PETG Tubing (Normal Temperature), 10mm ID, 14mm OD, 500mm length, Clear

    • PETG tubing for PC watercooling application
    • Normal bending temperature (70°C)
    • 10mm Inner Diameter / 14mm Outer Diameter
    • 500mm Length
    • Color: Clear
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    The Barrow PG1410-L is a clear PETG hard tube with a 14 mm outer and 10 mm inner diameter, 500 mm long. Barrow calls it a normal temperature PETG tube and rates it for up to 70°C. Cut it to length, bend it with heat and connect it with 14 mm hard tube fittings.

    Properties

    • Type: Hard tube (rigid)
    • Material: PETG
    • Size: 14 mm OD x 10 mm ID
    • Length: 500 mm
    • Maximum temperature: 70°C
    • Color: Clear
    • Pieces in the pack: 1

    Made for hard tube fittings

    This is rigid tube. It needs G1/4" fittings made for 14 mm OD hard tube; soft tube compression fittings and barb fittings do not fit it. Using the wrong fitting can crack the tube or cause leaks that damage your system.

    Why PETG

    PETG is tougher than acrylic and less likely to crack when you cut or bend it, which makes it an easy hard tube to start with. Its limit is temperature: Barrow rates this normal temperature tube for up to 70°C, so keep the loop well below that.

    Cutting and bending

    Cut the tube to the length you need with a tube cutter or a fine saw, then sand both ends lightly. The cut must be smooth and free of sharp edges: a sharp edge can cut the O-ring inside the fitting and cause a leak later. For bends, put a silicone bending cord sized for the 10 mm inner diameter inside the tube so it does not collapse, warm the section with a heat gun and bend it over a bending tool or template. Barrow sells bending cords for 8, 10 and 12 mm inner diameters.

    Technical data

    • Model: PG1410-L
    • Material: PETG
    • Outer diameter (OD): 14 mm
    • Inner diameter (ID): 10 mm
    • Wall thickness: 2 mm
    • Length: 500 mm
    • Maximum temperature: 70°C
    • Color: Clear

    Notes

    • Barrow makes the PG1410-L in red, blue, green and clear. This listing is the clear tube.

    In the box

    • 1x Barrow 14/10mm PETG Rigid HardTube (500mm) - Clear

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by ModMyMods Return Policy

    Manufacturer Contact Info

    LOADING...