
BesCable
Connecting with Confidence!
BesCable PoE Combiner & Splitter Adapter - Run 2 Cameras on 1 Ethernet Cable

Specification:
Compliant Protocol: IEEE802.3af
Power Supply Mode: Compatible with both mode A (end jumper method) and mode B (middle jumper method).
Power Supply: =24W
Input Power & Output Voltage: DC 12V
Output Ripple: <5%
Ethernet Communication Interface: RJ45
Data Transfer Rate: 10/100Mbps
Transmission Medium: CAT5 / CAT 5e / CAT6 Standard Network Cable
Transmission Distance: Approx 50 meters
Mean Time Between Failures (MTBF): >30000h

Note:
1. Only the RJ45 cable with simple crystal head can pass through the waterproof screw cap, the sheathed RJ45 would not pass.
2. If you connect a common camera instead of a PoE camera, you need to purchase an additional PoE splitter.
3. Support simultaneous networking of two cameras.
4. Works with most PoE switches and PoE cameras.
5. BesCable PoE combiner and splitter, a must have for IP Camera Installers!

BesCable PoE Combiner & Splitter Adapter - Run 2 Cameras on 1 Ethernet Cable

Specification:
Compliant Protocol: IEEE802.3af
Power Supply Mode: Compatible with both mode A (end jumper method) and mode B (middle jumper method).
Power Supply: =24W
Input Power & Output Voltage: DC 12V
Output Ripple: <5%
Ethernet Communication Interface: RJ45
Data Transfer Rate: 10/100Mbps
Transmission Medium: CAT5 / CAT 5e / CAT6 Standard Network Cable
Transmission Distance: Approx 50 meters
Mean Time Between Failures (MTBF): >30000h

Note:
1. Only the RJ45 cable with simple crystal head can pass through the waterproof screw cap, the sheathed RJ45 would not pass.
2. If you connect a common camera instead of a PoE camera, you need to purchase an additional PoE splitter.
3. Support simultaneous networking of two cameras.
4. Works with most PoE switches and PoE cameras.
5. BesCable PoE combiner and splitter, a must have for IP Camera Installers!

BesCable
Connecting with Confidence!















