Question 1

Can anyone tell me who makes Vision AMD computer case?  The computer is customed built with this motherboard and I'm looking to replace the power supply.  I bought the Enermax Revolution but it was too big.  Any help would be appreicated.

Accepted Answer

copy and paste this into a google search. you should be able to find an AMD Vision computer. maybe the info on this will help.
 
AMD VISION Premium Barebone PC - MSI 785GM-P45 Motherboard, AMD Athlon II X4 630 Quad Core CPU, ATI Radeon HD 5450 1GB, Cooler Master Elite 310 Mid-Tower Case, 350 Watt Power Supply

and this is the power supply i bought with this morthboard:
850W Gaming 120MM Fan Silent ATX Power Supply SATA 12V

hopefully some of this helps!

Question 2

Hi,
I want to check the hardware compatibility before making the purchase. 
I have a AMD cpu: Quad-Core A6-3670K 2.7GHz  and Memory:G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-16GBXL

Is this motherboard compatible with the CPU and memory?

Accepted Answer

I use this motherboard with an AMD A8-3870 Quad Core CPU and 16GB (two 8GB dimms) DDR3 1600 (PC12800) G.SKILL Aries Series memory. I have been very satisfied with this setup. I think that you will be OK using the AMD A6 cpu as well.

Question 3

Can you use both video ports on the mother board at the same time. If so How???????   Not with a graphics card.  The two video ports that are on the Motherboard.

Accepted Answer

yes you are able to. Connect the monitors, To any video source DVI, VGA, or HDMI then go to your graphic properties in your control panel, look for AMD control catalyst. then their will be a setting for multiple monitors. also please keep in mind that using VGA along with DVI or  HDMI will lower your resolution because VGA is only 480 max resolution

Question 4

Will it work wit a A8-6750 or A8 series processor?

Accepted Answer

I'm not sure as long as it is FM1 socket it should I do not recommend FM1 Socket because I have looked for a processor new and used for a few months with out any luck I would up grade to a Newer Socket MB& Processor

Question 5

Hi, I have 2 of the BIOSTAR TA75M+ that have not been completely installed.  I also have a pair of TEAM VULCAN DDR3 1333, CL 11-11-11-31, 1.65V, 4GB, TLD34G2133HC11ABK - I also have a pair ofGEIL BLACK DRAGON, PC3 10666 1333MHz, GB3166GB1333C9DC, CL 9-9-9-24, 4GB each stick.  All of the RAM is NEW - never installed.  Can I use either or both of these sets of ram with my TA75M+ ????  Please respond

Accepted Answer

You should be able to use all of them on that board for a total of 16GB of DDR3 on the motherboard.  I would leave all of the memory timing and voltage settings on AUTO so you don't cause any mis-match compatibility issues, sacrifice a little bit of access speed to have double the RAM. Make sure you have the latest BIOS on the board before you install all of the RAM and always run a memory test (like memtest 86) immediately.

Questions & Answers