Pros: Attractive... Uses standard ATX PSU form factor (instead of the harder-to-find smaller form-factor PSUs)... Lockable front panel...

Cons: Missing the necessary screws to install HD in slide-out HD cage (requires special screws). PSU leads so short they don't reach the motherboard at all; unusable without extension cables.

Overall Review: NewEgg was kind enough to credit me the amount for the necessary cables; they wouldn't cover the shipping which was unfortunately high, but at least they met me halfway.

Pros: This case now comes with the 20/24 motherboard power connector so the newer boards can be used. Cables may be longer now too as I didn't need to use any extensions.

Cons: The motherboard doesn't line up with the mounting holes exactly but got the MB mounted with some effort. When plugging in the riser card and a PCI card into it, there isn't much clearance for the card bracket and had to (almost) force it to get it to fit well. Only 1 USB connector on the front. The wiring for the switches and LED connectors had to be modified to connect correctly; the wire routing leaves a lot to be desired. The rear panel cover didn't match up with the motherboard I used; removed the panel and had to make the other panel work/fit or go without. Be careful, there are some SHARP edges on this case, just like the old PC cases of 15+ years ago. The fans are LOUD! I'm going to search for some quieter fans. The 2 'hotswap' trays are just blank trays; I haven't found a compatable backplane for them, yet. This case just isn't worth this cost.

Overall Review: I read the previous reviews on this case before I ordered it and didn't totally believe what the others had said; they were right! I have 4 computers that I want to convert from desktop cases on rack shelves to rackmount cases. This was the 1st case I purchased to try the conversion. I'll try a different case next time and hope it works better/easier than this one did. I would have returned this case but don't want to go through all the installation issues again after I finally got this case (pretty much) working.

Pros: Low low price. Fits almost any motherboard. Has better cooling than same priced units.

Cons: It's cheap. I had to break off one of the pins that holds the motherboard up and put a plastic replacement because the metal piece was cut incorrect and was twice the size of the others. Also buy a $x motherboard power extension.

Pros: The chassis was very attractive, lockable, lines up perfectly in my server rack. NewEgg sent item in perfect condition and quick speed.

Cons: my ATX board fits in the case fine, but fell 1.5" short from lining up with peripheral back plate. That plate is also soldered to the chasis, and I had to cut it out with dremmel saw. Fans in the middle of the chassis do not blow air out of the case efficiently, I had to zip tie a newly purchased case fan to the rear of the case.

Overall Review: Air flow, poor design, I modified the case right out of the box, get something else