• $8.19
  • Sale Ends in 7 Hours -
  • Free 30-day Returns
  • Price alert
    Add to wish list(Found on 9 wish lists)
    Shop it at NeweggBusiness.

    EnLabs 1X2PWM25CM 10 inch Black Sleeved 4pin PWM 2-Fan Power Y Splitter Cable,PMW 4pin 1 to 2 Converter Cable - 10"

    Limited time offer, ends 09/30 By EN Labs Marketplace

    • PWM 4pin 1 to 2 power splitter Y cable
    • Connected 2 fans to motherboard 4pin header
    • Support PWM fan speed control
    • All fans run in same speed
    • 10 Inches in cable length
    +
    +
    Overview
    Specs
    Reviews (9)
    avatar

    Any questions? Our AI beta will help you find out quickly.

    image for this item
    Features
    • Connects 2 computer case fans to a single motherboard fan header;
      1 to 2 fan converter cable connects an additional fan to increase airflow in your computer case;
    • Motherboard 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans;
    • Fans can spin at the same speed using software from a motherboard equipped with PWM control;
    • MASTER/SLAVE FAN PLUGS have a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan. The other 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans;
    • 3-PIN & 4-PIN FAN COMPATIBLE with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240

    Note:
     

    • 3pin fans are run in full speed, no PWM function
    • Only the fan on 4-pins connector is used for monitoring.
    • All connected fans are following the same PWM signa, speed control is the same for all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE, etc
    • PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. Please carefully consult your motherboard documentation in this respect.
    image for this item
    • PWM 4pin to 2 ports fanout splitter cable
    • Supports two fans connect to motherboard CPU_FAN header
    image for this item
    • PWM TX4 4Pin header connect to motherboard CPU_FAN or SYS_FAN
    image for this item
    • Just one header include 4 wires for PWM control
    • The other header just include 3 wires
    • Please make sure the header with full 4pin tips always connect fan preferentially
    Specification
    Type PWM Fan Power Splitter Cable
    Cable Length 10 Inches
    Conductor 22AWG Copper
    Connector A 1 x 4pin PWM fan TX4 Female
    Connector B 2 x 4pin PWM Fan TX4 Male
    Power supports Motherboard CPU_FAN or SYS_FAN
    Compatible Compatible with 3-Pin & 4-Pin Fan
    Features

    En-Labs PWM fan power splitter cable 1X2PWM25CM connects 2 computer case fans to a single motherboard fan header;
    1 to 2 fan converter cable connects an additional fan to increase airflow in your computer case;
    Motherboard 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans;
    Fans can spin at the same speed using software from a motherboard equipped with PWM control;
    MASTER/SLAVE FAN PLUGS have a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan. The other 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans;
    3-PIN & 4-PIN FAN COMPATIBLE with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240


    Specifications

    Type - 1 x 2 PWM fan power splitter cable
    Connector A - 1 x PWM 4pin female
    Connector B: 1- TX4 4-pin Male
    Connector C: 1 - TX4 4-pin Male (3 wires only, missing the pin of tach)
    Length - 10 inch
    Voltage: 12VDC
    Color: black sleeved cable

    Note:

    3pin fans are run in full speed, no PWM function
    Only the fan on 4-pins connector is used for monitoring.
    All connected fans are following the same PWM signa, speed control is the same for all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE, etc
    PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. Please carefully consult your motherboard documentation in this respect.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...