RJ45 Ethernet Splitter, 1000Mbps Ethernet Splitter 1 to 4 with USB Charging Cable, suitable for network expansion with Cat5/5e/6/7 cables
Solve connection problems caused by insufficient cabling, insufficient line length, or using multiple devices for networking
1 in and 4 out, each port supports 10/100/1000Mbps auto-negotiation for all ports
The transmission distance is up to 100 meters and the signal is stable.
The 4 ports can connect two devices to the Internet at the same time without interfering with each other.
(Note: Cannot be used when not connected to the power supply)
Use simultaneously
The RJ45 splitter can divide a cable into 4 outputs. Each group (4 channels) has a speed of up to 1000Mbps and can be used at the same time, and the signals of the 4 cables will not interfere with each other.
Input port: 1 RJ45
Output port: 4 RJ45
Power port: USB C (5V 1A)
Network speed; supports up to 1000Mbps
Distance: supports up to 100 meters
Network cable compatibility Cat8, Cat7, Cat6, Cat5 and Cat5e.
Ethernet Splitter 1 In 4 Out: This RJ45 splitter is mainly used to solve connection problems caused by insufficient wiring. It supports 3 computers sharing an Ethernet cable at the same time and using
High-speed and stable transmission, allowing the network connection to be divided into 4 outputs, with a maximum throughput of 1000 Mbps for each set of cables (1 and 2 and 3 and 4), and no interference between the 4 sets of cables
Ethernet cable splitters are compact and space-saving. Easily connect devices, simply plug them into a 5V/1A DC power source and go, simplifying installation and minimizing network setup confusion
This Gigabit Ethernet splitter is equipped with a USB charging cable and cannot be used when not connected to a power source.
Wide Compatibility: RJ45 8P8C LAN Internet Splitter Connection Extender works with Cat8 Cat7 Cat6 Cat5 Cat5e network Ethernet cable, can be used with ADSL, hubs, switches, TVs, set-top boxes, routers, wireless devices, computers and more
RJ45 Ethernet Splitter, 1000Mbps Ethernet Splitter 1 to 4 with USB Charging Cable, suitable for network expansion with Cat5/5e/6/7 cables
Solve connection problems caused by insufficient cabling, insufficient line length, or using multiple devices for networking
1 in and 4 out, each port supports 10/100/1000Mbps auto-negotiation for all ports
The transmission distance is up to 100 meters and the signal is stable.
The 4 ports can connect two devices to the Internet at the same time without interfering with each other.
(Note: Cannot be used when not connected to the power supply)
Use simultaneously
The RJ45 splitter can divide a cable into 4 outputs. Each group (4 channels) has a speed of up to 1000Mbps and can be used at the same time, and the signals of the 4 cables will not interfere with each other.
Input port: 1 RJ45
Output port: 4 RJ45
Power port: USB C (5V 1A)
Network speed; supports up to 1000Mbps
Distance: supports up to 100 meters
Network cable compatibility Cat8, Cat7, Cat6, Cat5 and Cat5e.
Ethernet Splitter 1 In 4 Out: This RJ45 splitter is mainly used to solve connection problems caused by insufficient wiring. It supports 3 computers sharing an Ethernet cable at the same time and using
High-speed and stable transmission, allowing the network connection to be divided into 4 outputs, with a maximum throughput of 1000 Mbps for each set of cables (1 and 2 and 3 and 4), and no interference between the 4 sets of cables
Ethernet cable splitters are compact and space-saving. Easily connect devices, simply plug them into a 5V/1A DC power source and go, simplifying installation and minimizing network setup confusion
This Gigabit Ethernet splitter is equipped with a USB charging cable and cannot be used when not connected to a power source.
Wide Compatibility: RJ45 8P8C LAN Internet Splitter Connection Extender works with Cat8 Cat7 Cat6 Cat5 Cat5e network Ethernet cable, can be used with ADSL, hubs, switches, TVs, set-top boxes, routers, wireless devices, computers and more