| Firewall Type | Gen 2 Stateful Filter |
|---|
| Type | Other |
|---|
| Standard | IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless quality of service [QoS]), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723) |
|---|
| Wireless Technology | IEEE 802.11b/g/n |
|---|
| Modulation | Radio and modulation type: 802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM |
|---|
| Simultaneous Sessions | 1000 |
|---|
| Throughput | 95 Mbps |
|---|
| Antenna | External antennas : 2 (omnidirectional) |
|---|
| LAN Ports | 4 x RJ-45 |
|---|
| WAN Ports | 1 x RJ-45 |
|---|
| Wired Speed | 10/100 Mbps |
|---|
| LEDs | POWER, WAN, WIRELESS, LAN (ports 1-4) |
|---|
| Security | Access control : IP access control lists; MAC-based wireless access control, and wireless profiles
Firewall : Stateful packet inspection (SPI) firewall
Content filtering : Static URL blocking or keyword blocking
Secure management : HTTPS, username/password, X.509 v3 certificates
WPS : Wireless Protected Setup
802.1X : Port-based RADIUS authentication (Extensible Authentication Protocol [EAP] MD5, Protected EAP [PEAP])
Channels selection : Auto channel selection
Certificate Managements : X.509 v3 certificates, certificate upload using PEM format |
|---|
| VPN | 10 QuickVPN tunnels for remote client access
10 IPsec site-to-site tunnels for branch office connectivity
Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption
MD5/SHA1 authentication
VPN pass-through of PPTP, L2TP, Ipsec
Dead Peer Detection (DPD)
IPsec NAT traversal |
|---|
