Cooler Master Accessory: Universal Vertical Graphics Card Holder Kit Ver.2 (PCIe 3.0) - For Full Tower / Standard ATX Chassis with at least 7 available PCI slots

Cooler Master Universal Vertical Graphics Card Holder Kit V2 (PCIe3.0)

MAKE OF IT WHAT YOU WILL

The Cooler Master Universal Graphics Card Holder Kit Version 2 comes redesigned for maximum compatibility and easy installation. The revolutionary accessory returns with a new design that allows the bracket to move back and forth to accommodate all standard ATX chassis and various sizes of graphics cards. A high-quality version 2 riser cable is included to complete the kit. Installation is painless: Connect the riser cable to the motherboard, install the GPU holder to the chassis, then install the GPU to the holder itself and youre set.

IMPORTANT NOTE:

This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.

Features:

SHOWCASE YOUR GRAPHICS CARD

The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.

COMPATIBLE WITH ALL STANDARD ATX CHASSIS

The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.

MODULAR, INSTANTLY ADJUSTABLE DESIGN

The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.

DURABLE, HIGH QUALITY MATERIALS

Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder

COOLER MASTER RISER CABLE VERSION 2 INCLUDED

A high quality Cooler Master V2 PCIe 3.0 Riser Cable (165mm / 6.49" in) completes the vertical GPU holder package.

IMPORTANT NOTE:

This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation.

If you have a PCI-E 4.0 Graphics Card & PCI-E 4.0 supported Motherboard, pleaseDO NOT BUY THIS Vertical Graphics Card Holder. You MUST purchase "Cooler Master Universal Vertical Graphics Card Holder Kit V2 (PCIe4.0)" instead in order to get the full performance of PCI-E 4.0 Graphics Card.

Specifications:

• GFX Holder kit Dimensions: 184 x 142 x 121mm (7.25 x 5.59 x 4.77 inches) @Closed Position

• Riser cable Lenght: 165mm (6.49 inches)

• Net Weight: 410g (0.9 lb)

• Supported Graphics Card: Any length, up to 2.5 slots wide

• Riser Cable Model: Riser Cable PCie 3.0 Ver.2

• Connectivity Compatibility: PCIe 3.0

• Certifications: EMI, IPC4101D/21

• Electronic Component Materials: PCBA, Copper Wire 28 AWG, Copper Wire 30 AWG

• Insulation Materials: PE, TPE

• Other Materials: ABS, SPCC, SGCC Steel, Nickel, Gold, Brass
• Required PCI slots: 7 PCI slots are required for mounting
• IMPORTANT NOTE: This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation., The Vertical GPU Holder Kit V2 can also accommodate 3-slots GPUs but allows installation of only 2 screws out of 3

Package and Contents:

• 1 x Vertical Graphics Card Bracket

• 1 x Riser Cable

• 4 x Mounting Screws

• 2 x Thumbscrews

• Item in retail packaging

Note: The graphic cards shown in the picture are used for demonstration ONLY & it will NOT be included!