Monoprice 2793 Choice Series 16AWG Oxygen-Free Pure Bare Copper Speaker Wire, 100ft

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from Monoprice! For the wire to have no audible effect, the total wire resistance should be no more than 5 Percent of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers.

For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2 -ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms, well under the 0.2 -ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well OVER the 0.2 -ohm limit.