Question 1

Are these memory sticks unbuffered? I want to use these in a Ryzen build and the CPU supports unbuffered RAM modules.

Accepted Answer

All things are subject to change but, ECC is Error Correcting Memory and is commonly found in Server MB's to try and insure that the data is correct that is being sent to whomever requested it. It runs a little slower than non-ECC memory because of the cliock-cycles spent making sure their are no errors in the data or correcting the mistake if found,. Generally a home server might not have ECC memory but it is advisable in a commercial environment where the quality of the data is imperative. Usually non-ECC Unbuffered modules are used in home PC's. I have seen some Hynix Buffered ECC modules that would kind-of work in certain desktop MB's without erroring out but that's an exception, not the rule.
Things could change yesterday ... in which case nevermind.
michael_clyde

Question 2

will this work with 
MSI MPG Z590 GAMING PLUS ?

Accepted Answer

Yes it will and very well.

Question 3

Would this Ram would On Intel 10th Gen B460M-DS3H build?

Accepted Answer

Yes, the memory supports Intel 400 series chipsets, and the B460M-DS3H supports up to DDR4 2933 with i9 / i7 processors via XMP.

Question 4

will this work in my alienware r8 to replace my Kingston XJ69DF-HYA. XMP 8GB, 2933MHz, DDR4, 1Gx64, 8K, 288 pin, 1Rx8, Single Rank, Unbuffered, 1.35v, Non-ECC ?

Accepted Answer

It would yes, if I were you I would look for the fastest compatible RAM that works with your CPU. There are lists out there. Perhaps DDR 3200Mhz, if compatible with that CPU you can get some extra speed. CPU just needs to support DDR4 3200, you need to enable the XMP profile in the BIOS though to get 3200Mhz.

But regardless yes, that will work. Will be an easy upgrade.

Question 5

is this compatible with ASRock b450m Pro4-f motherboard?

Accepted Answer

Yes, it is compatible with all supported CPUs for the B450M.  Note that with Pinnacle Ridge and Summit Ridge CPUs, 2933 speed requires overclocking.  This should be fine with sufficient cooling, but if you have any doubts, go with 2667 speed instead.  You can see the full specs on the ASRock website.

Question 6

will it work at 2933mhz with a first gen ryzen, assuming the motherboard supports 2933?

Accepted Answer

Ryzen first gen are picky, depends on the board and the setup but yes...I have gotten it to run at that speed.

Question 7

I want to buy this but everyone is talking about AMD and Ryzen... Does this work with Intel-based machines? I have a Z170A mobo and i6500 in my rig and now I'm uncertain whether or not this is compatible with my intel build after hearing all this AMD talk.

Accepted Answer

Corsair no longer lists the 2933 model on their site, but their 3000 model is compatible with both Intel and AMD chipsets, the voltage is the same at 1.35v, and they are both CAS16.  The Z170-A motherboard supports memory speeds up to 3466, so you shouldn't have any issues with speeds at or below that limit.  Worst case you can disable XMP and run the memory at the non-overclocked 2133 speed if you experience instability.

Question 8

Will this work with my AMD Ryzen 5 2400G cpu?

Accepted Answer

Yes, the CORSAIR Vengeance LPX (AMD Ryzen Ready) 16GB RAM is compatible with AMD Ryzen processors, including the AMD Ryzen 5 2400G.

Question 9

Will This Work With My Raven Ridge 2400G and a AsRock B450M R4.0 Mobo?  Im looking to upgrade my ram

Accepted Answer

Yes, according to AsRock it will work with the Mobo and CPU you have listed.

Question 10

Will work with MSI X470 GAMING PLUS?

Accepted Answer

Yes it will and very well. You just need to make sure to turn on memory boost to utilize it at the speed you want.

Brand	CORSAIR
Series	Vengeance LPX
Model	CMK16GX4M2Z2933C16

Capacity	16GB (2 x 8GB)
Type	288-Pin PC RAM
Speed	DDR4 2933 (PC4 23400)
CAS Latency	CL16
Timing	16-18-18-36
Voltage	1.35V
Color	Black
Heat Spreader	Anodized Aluminum
Features	Designed for high-performance overclocking Each VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential. Designed for great looks Available in multiple colors to match your motherboard, your components, or just your style. Performance and Compatibility VENGEANCE LPX is optimized and compatibility tested for the latest DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. Low-profile heatspreader design The VENGEANCE LPX module height is carefully designed to fit smaller spaces.
Recommend Use	AMD 300 Series / AMD 400 Series / AMD Ryzen Compatible / AMD TRX40 / AMD X470 / AMD X570 / AMD 500 Series / Intel 100 Series / Intel 200 Series / Intel 300 Series / Intel 400 Series / Intel 500 Series / Intel X299

Meet Your Seller

CORSAIR Vengeance LPX (AMD Ryzen Ready) 16GB (2 x 8GB) 288-Pin DDR4 2933 (PC4 23400) AMD Optimized Desktop Memory Model CMK16GX4M2Z2933C16

Learn more about the Corsair CMK16GX4M2Z2933C16

Customer Reviews of the Corsair CMK16GX4M2Z2933C16

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIB8AKKAR3386