Question 1

Will this fit on LGA 1151?

Accepted Answer

The Corsair H110i GTX  specs list compatibility as:

Intel LGA 1150, 1155, 1156, 1366, 2011 and 2011-3

So I called their tech support and they said it will work on Socket 1151.  The guy I talked to said he would try to get the specs updated on their website .

So, the answer is the H110i GTX will fit on LGA 1151.

The tricky part is to make sure the hole spacing on the radiator matches your case.  On my Corsair 500R case the 110i GTX would not fit until I moved the 4 holes for the top mounted front fan 5mm towards the rear of the case.  If you are handy with tools it was a 20-minute fix and turned out great.  If you are using a Corsair case you can also check the case's Tech Specs page to see which of their CPU liquid coolers are compatible.  However, I would recommend modifying the case to get the H110i GTX to fit because it is vastly superior to all their other CPU cooler models.

Good luck.

Question 2

Are the fans included with this system Static Pressure fans?

Accepted Answer

Yes. From the official site:

"Dual SP140L PWM fans

The included 140mm fans are custom-designed for high static pressure air delivery with minimum turbulence and noise. They’re PWM controlled, so you can customize the fan speed to find the optimal balance of cooling and noise."

Specs:
    Fan dimensions: 140mm x 25mm
    Fan speed: 2000 +/- 10% RPM
    Fan airflow: 104.65 CFM
    Fan static pressure: 3.99mm-H2O
    Noise level: 40 dB(A)

Question 3

does it come with thermal paste?

Accepted Answer

In a way, yes. There's a thin coat of thermal stuff on the copper part when you get it. I didn't touch it to see if it was paste or what, but that was my assumption. If you have more questions, you may want to ask in the corsair forums, which are frequented by their staff.

Question 4

Is the corsair h110i gtx compatible with LGA 1151 sockets? -Thanks in advance

Accepted Answer

Yes. I have mine on a Skylake i7-6700K. It uses the same screws as the LGA 1150 socket.

Question 5

Is there any LED lighting on the H110 or H110i?  Also, will it fit in LGA 1151?

Accepted Answer

Hello,

There is no LED lighting on either the reservoir or the fans, sorry.

As for Skylake support: I think the socket is too new to really know the answer. The best I can give is that the GTX110i was released prior to SkyLake being released, but only by a tick. You might check Corsair's website, but i would be surprised if there wasn't an adapter for it. I'm currently using it on X99 just fine.

Hope that helps!

Question 6

why is Am3+ not listed?

Accepted Answer

That is a question that I would ask Corsair, they have a knowledgeable tech team that could answer that.

Question 7

will the brackets work on an LGA 1156 platform?

Accepted Answer

yes.

From Corsairs specs page:
AMD: AM2, AM3, FM1, FM2, Intel LGA: 1150, 1155, 1156, 1366, 2011, 2011-3

Question 8

Will this fit in a Thermaltake GT10 case?

Accepted Answer

I installed it on a Coolermaster storm trooper on the top, the radiator requires space for 2 * 140mm fans and I don't see any place on the GT10 to put it, unless you can install it outside; even if you can fit the radiator inside, pay attention to the ticknes of it (28mm I think) plus the thickess of the fans (20mm I think) In my particular case it barely fit because of the atx power cables of my motherboard

Question 9

so I installed my h110i gtx and tried to change LED color but when I opened the Corsair Link, I couldn't find anything about the change LED color... so where?

Accepted Answer

I also had no led color option until i uninstalled the corsair link software and installed the updated software that supported the H110i GTX cooler

Corsair LinkCorsair Link Software3.1.566707/20/2015

This version has the led color option in the system tab of the software.

It can be downloaded from corsair at:

corsair/support/downloads

select corsair link

choose version:

Corsair LinkCorsair Link Software3.1.566707/20/2015

Hope this helps you.

Question 10

I saw that radiator is 26mm, then what is total height for both fans and the radiator?

Accepted Answer

The fans are the standard 25mm thick ones, so that would be 51mm total.

Questions & Answers