Question 1

I'm having trouble setting up. My router does not have a WPS button. Any advice?

Accepted Answer

Same thing happened to me. I have an Arris cable modem which has no WPS button. You're gonna' have to configure it manually (the instructions explain how to do it). Just plug the D-Link in an outlet from which you have line-of-sight to your current router; in your computer (which should also have line-of-sight to the D-Link, just to make sure you're in optimal range) connect to the D-Link just as you would connect to any wireless network (you'll see that the wireless connection will display "Connected. No internet access"); then open your browser and go to the local page indicated in the instructions (http://dlink-328/ or something like that) and log in using the supplied information (on the instructions), from there you will be able to select your current router and assign a name and password to your D-Link range extender (as per the installation wizard instructions). After that you'll see the little light fixed green. Then you can move the D-Link to another outlet and after a few minutes you'll see the little light fixed green again. You're good to go. Hope this helps. Cheers!

Question 2

Can I use several of these extenders to connect to the same wireless network?

Accepted Answer

I believe you would but you'd probably have to configure each additional extender manually. Let's think about this logically: the first extender (D-Link 1) will connect to your router but you need your second extender (D-Link 2) to connect to your first extender and so on (the third to the second, the fourth to the third). In order to achieve this, again, you might have to configure each additional D-Link manually (the instructions are included). The connection would be like a daisy chain (ROUTER > D-LINK#1 > D-LINK#2 > D-LINK#3). You'll be able to assign each extension point its own name and password, like "Basement WiFi", "Backyard WiFi" or whatever.

Do note that speed will diminish with every new connection so you might experience slower speeds. Again... I haven't tried this, but if we look at it logically there's no reason why it shouldn't work.

Brand	D-Link
Model	DAP-1120

Standards	IEEE 802.11n IEEE 802.11g
Security	WPA & WPA2 (Wi-Fi Protected Access) Wi-Fi Protected Setup (WPS) PIN / PBC
WPA/WPA2	WPA2
Antenna	Two internal Antennas
LED	Power / Status
Power	Input: 100 to 240 V AC, 50 / 60 Hz Consumption: 0.5 A
System Requirements	Windows 10, Windows 8.1, Windows 8, Windows 7 , or Mac OS X (v10.7) Internet Explorer 11, Mozilla Firefox v28, Google Chrome v33, or Safari v7
Dimensions	1.65" x 2.11" x 1.89"
Weight	0.17 lb.

Operating Temperature	0°C - 40°C (32°F - 104°F)
Operating Humidity	10% - 90%, Non-Condensing
Storage Temperature	-4 degree F ~ 149 degree F
Storage Humidity	5% to 95% non-condensing

Meet Your Seller

D-Link DAP-1120 N300 Wi-Fi Range Extender

Learn more about the D-Link DAP-1120

Customer Reviews of the D-Link DAP-1120

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIA1K6K2B1133