BEST SELLERS

In Computer Cases

4 included fans that are ALL 140mm? that is wild. Solid tempered glass. LOADS of zipties. Good metal for the price.

Spacious, easily accessible, comes with extra hardware, and a wonder to work with

This is a straight forward nice looking case. Good build quality. 140mm fans as opposed to other cases in this price range that give 120mm fans. Room to spare. A large interior space provides room for better air flow, room for a three fan video card and more room for your hands to get in there and work.

Excellent quality build. Very sturdy and well made. From the rivet's to the panels. I like the fact the side panels and the top and front panels, just snap on. No screws to mess with. The PSU is mounted sideways due to the two 120 fans blowing air on the GPU. Nice touch. I bought two of these, one for my build and another for a build for someone else. One is white and the other black. Both same quality build. I chose a smaller case this time. I have a full MSI ATX motherboard. A 9900x CPU and a 4070 GEFORCE GPU. 360 top mounted artic AIO. The air flow is fabulous without the AIO. The system stays cool. CPU stays at 60 c or less. 4 slots for M.2 storage. I could go on and on, very satisfied. Edges are all smooth, not rough. Kudos To Lian Li.

Very well made, well thought out on design. Plenty of wire run room. Lots of storage for SSD, 3 1/2 drives.

Looks incredible, especially for $60. Was a little unsure about it when purchasing, but very satisfied with the quality of the parts. The finished product once it's fully built is about as good as it gets. Good airflow, lots of mesh, great aesthetics, power button is pretty satisfying. Lots of cutouts for cables to feed cables through, so the amount of time they spend in view is minimal. What pushed me over the edge to get this one over the comparable Thermaltake fish tank was that this one includes reverse blade intake fans in the front, which is really nice attention to aesthetic detail that usually gets ignored at this price point. I would absolutely buy this case again if I ever want another fish tank and have already recommended it to friends.

Easy assembly, lots of room to work for the most part

-Plenty of room inside the case for anything you might want to put inside -Comes with 6 fans which are all amazing quality -Overall design is well made and beautiful -Amazing airflow and dust filters

Lian-li has some of the most innovative products on the market now. This case you can easily switch out fans to any brand or use the pre installed ones. More than enough room for parts and cable management. The wood trim is real wood not plastic.

I recommend this product Montech king 95 pro very good

Perfect full tower!

This whole product oozes german engineering. Before the case review itself, my favorite part. It came with a small plastic container, filled with individually marked bags of every type of screw that could be needed. And dividers for the container so that each type of screw could have it's own compartments for storage. It includes a GPU support mount for if you have one of the "3 fan" GPUs. One of the included "screws" types are rubber isolation mounts for the hard drives to be mounted but isolated from vibration (and of course they include screws that fit these perfectly). Everything you could need to mount every component you have exactly how you want it. The front, right, left and front panels are all removable (they just pop off). The metal brackets you mount most things on (especially the PSU) are removable, and they attach by having a small tab of metal that rests inside the frame, and then a tiny screw that holds the bracket in against the frame. Works beautifully and the weight is not on the threads of the screws. The people who said this "doens't fit their PSU" almost definitely just used the product wrong. I have the standard PSU size which fits great (pull off the front panel and bracket for easier installation though) but there are 2 other bracket adapters with multiple mounting holes for every type of PSU. If you managed to find a PSU that doesn't fit, I honestly do not trust that PSU. It is either so old or built so far from standard practices that I would not run it in my home for safety reasons. And of course this case looks nice. Got my board with chunky graphics card, and network, and liquid cooler, spare drive and corsaid lightning node installed happily in at least 1/3rd less space. Matches perfectly with the brown wood/black metal ikea furniture most of my house is decked out in. Oh and the fiddly little wires that are the worst part of setting up a motherboard? Actually bundled together and labeled. Easiest install of those I've ever had. I can't believe how much quieter this case is. With the full metal mesh everywhere the air just circulates unimpeded. Also that metal mesh is very strong, don't understand quite how they got it as strong as they did.

- Really nice looking ARGB fans with a hub in the back for easy connectability. - Very solid material, feels like quality when I carry and work around in the case.

Great price Easy to build in Great size Simple look but it's beautiful Give you a lot of room for GPUs Can use back connect motherboards Feels premium So many fan mounting options Buy it already!

The Corsair FRAME 4000D RS is a big case. Its comical that it is classified as a mid tower ATX case. It can handle EATX motherboards easily. For graphics cards, I cant imagine a card that wont fit in the cavernous interior. The case has a built in GPU support too, but my graphics card, an RTX 4080 Super, was too short to make use of the support without relocating it. I opted to just use the support that can with my card instead, but the option is nice. Speaking of graphics card options, this case allows you to rotate the back card slot panel by 90° so you can vertical mount your graphics card. Unfortunately, Corsair offers the required PCIe riser cable separately, so plan for that if you want to vertical mount your GPU. There are some very innovative engineering going on here that Ive never seen before. First, nearly every part of the case is removable. This can be cumbersome as you build since you will have an increased number of screws to keep track of as you disassemble the case panels and parts, but it is a worthwhile tradeoff to make building easier. This case is optimally designed to sit on a desktop, not at floor level, with all front I/O ports and power button on the very bottom of the case. With the clear side window, its nice to be able to hide all of the cables very easily with the modular design that allows tucking everything away. This is a case meant to be on display. A first for me, this case comes with a standardized front panel pin plug instead of individual wires for power button and LED. I have been waiting for something like this for decades. No more hunting down the user manual for pinout diagrams. Corsair does include an adapter to use individual wires in the off chance your motherboard pins do not match the plug pinout, but it worked fine for my MSI X670E Tomahawk.

Large case for easy wire maintenance and setup. Everything fits without a worry. Even my Artic liquid freezer III AIO fits on top with no issues. All I have are the 3 front fans, my AIO on top as exhaust, and I bought a rear 140 exhaust fan. Keeps everything nice and cool with my cpu idling at 28-30C. The front fans are kept around 45-50% RPM ~ 1000. Any higher and you can hear them. People were saying the front panel was flimsy but I have had no issues but I do tend to be careful when handling my items. I always have been a fractal lover since the define and Meshify C. Glad to continue the tradition!

So easy to build in Looks incredible Love the removable column Lots of room for cable management

All the little things. Thumb screws don't need to come all the way off. Every part of the case is easily accessible. Even the top of the case is a door. Screws come in a re-useable plastic case like you would get at a hardware store.

Case was easy to build in Great view of all components Two mother board layouts

- The aesthetic PC case you could find - Good airflow - enough room for cable management - decent front panel - The main pro of this case is the way it makes your PC look and feel