BEST SELLERS

In Computer Cases

Excellent Size Case Great Airflow Included 120mm fans * 4 (3 in front and 1 rear) Fall fans are already daisy chained and ready for motherboard RGB hookup (You do not need any additional cables, I purchased extra phantek cables and didn't require them) Tons of space, easy to open and close covers Feels Premium for a non premium price!

Spacious, easily accessible, comes with extra hardware, and a wonder to work with

It is perfect for the aesthetic and airflow I want in my pc case.

I love the cable management in this. Comes with velcro bands to help manage your cables in the back, LOADS of room with even PSU storage in the back. The SSD drive bay is VERY tidy and handy. If you want to customize it, it seemed to take spray paint very well. Panels all came off very easily for putting it together, painting, and for future cleaning. Easily accessible dust filters on every vented surface is greatly appreciated given I have pets.

Looks incredible, especially for $60. Was a little unsure about it when purchasing, but very satisfied with the quality of the parts. The finished product once it's fully built is about as good as it gets. Good airflow, lots of mesh, great aesthetics, power button is pretty satisfying. Lots of cutouts for cables to feed cables through, so the amount of time they spend in view is minimal. What pushed me over the edge to get this one over the comparable Thermaltake fish tank was that this one includes reverse blade intake fans in the front, which is really nice attention to aesthetic detail that usually gets ignored at this price point. I would absolutely buy this case again if I ever want another fish tank and have already recommended it to friends.

Everything. Literally a high end case at a budget case price. The Front panel connector is one piece. Glad they figured that one out since people like me have been taping the front panel connectors into a singe block for decades.

Excellent packaging, everything is wrapped nicely, hardware came in its own resealable container. Excellent craftsmanship, all the tooling is true and correct. Easy to assemble. Optional configurations, though I went with standard layout, there is an option to reverse the layout. Easy to remove panels, snaps together securely. More living space than my first apartment.

Airflow is really good. Great first builder case. Lots of room to work with. Amazing Lian li quiality

fans included w controller, cable managed, lots of room for storage drives

I love the design. It's very easy to work with.

Great aesthetics, easy to build in, lots of room for large gpus, easy cable management, pro version has all fans pre-installed, and tempered glass is thick.

The Corsair FRAME 4000D RS is a big case. Its comical that it is classified as a mid tower ATX case. It can handle EATX motherboards easily. For graphics cards, I cant imagine a card that wont fit in the cavernous interior. The case has a built in GPU support too, but my graphics card, an RTX 4080 Super, was too short to make use of the support without relocating it. I opted to just use the support that can with my card instead, but the option is nice. Speaking of graphics card options, this case allows you to rotate the back card slot panel by 90° so you can vertical mount your graphics card. Unfortunately, Corsair offers the required PCIe riser cable separately, so plan for that if you want to vertical mount your GPU. There are some very innovative engineering going on here that Ive never seen before. First, nearly every part of the case is removable. This can be cumbersome as you build since you will have an increased number of screws to keep track of as you disassemble the case panels and parts, but it is a worthwhile tradeoff to make building easier. This case is optimally designed to sit on a desktop, not at floor level, with all front I/O ports and power button on the very bottom of the case. With the clear side window, its nice to be able to hide all of the cables very easily with the modular design that allows tucking everything away. This is a case meant to be on display. A first for me, this case comes with a standardized front panel pin plug instead of individual wires for power button and LED. I have been waiting for something like this for decades. No more hunting down the user manual for pinout diagrams. Corsair does include an adapter to use individual wires in the off chance your motherboard pins do not match the plug pinout, but it worked fine for my MSI X670E Tomahawk.

Comes with PWM controller fan hub Good weight, not a really cheap feel Addressable RGB either controlled by software or button on top. Good clearance between case feet, allowing acceptable airflow

Extra large easy to fit everything I need and was very neat and tidy with the wires having velcro closures. Well organized and

This whole product oozes german engineering. Before the case review itself, my favorite part. It came with a small plastic container, filled with individually marked bags of every type of screw that could be needed. And dividers for the container so that each type of screw could have it's own compartments for storage. It includes a GPU support mount for if you have one of the "3 fan" GPUs. One of the included "screws" types are rubber isolation mounts for the hard drives to be mounted but isolated from vibration (and of course they include screws that fit these perfectly). Everything you could need to mount every component you have exactly how you want it. The front, right, left and front panels are all removable (they just pop off). The metal brackets you mount most things on (especially the PSU) are removable, and they attach by having a small tab of metal that rests inside the frame, and then a tiny screw that holds the bracket in against the frame. Works beautifully and the weight is not on the threads of the screws. The people who said this "doens't fit their PSU" almost definitely just used the product wrong. I have the standard PSU size which fits great (pull off the front panel and bracket for easier installation though) but there are 2 other bracket adapters with multiple mounting holes for every type of PSU. If you managed to find a PSU that doesn't fit, I honestly do not trust that PSU. It is either so old or built so far from standard practices that I would not run it in my home for safety reasons. And of course this case looks nice. Got my board with chunky graphics card, and network, and liquid cooler, spare drive and corsaid lightning node installed happily in at least 1/3rd less space. Matches perfectly with the brown wood/black metal ikea furniture most of my house is decked out in. Oh and the fiddly little wires that are the worst part of setting up a motherboard? Actually bundled together and labeled. Easiest install of those I've ever had. I can't believe how much quieter this case is. With the full metal mesh everywhere the air just circulates unimpeded. Also that metal mesh is very strong, don't understand quite how they got it as strong as they did.

Fantastic product. Very easy to build in, panels are all screw-less and easy to remove. Was able to find the exact matching fans from Newegg, very satisfied.

Large case for easy wire maintenance and setup. Everything fits without a worry. Even my Artic liquid freezer III AIO fits on top with no issues. All I have are the 3 front fans, my AIO on top as exhaust, and I bought a rear 140 exhaust fan. Keeps everything nice and cool with my cpu idling at 28-30C. The front fans are kept around 45-50% RPM ~ 1000. Any higher and you can hear them. People were saying the front panel was flimsy but I have had no issues but I do tend to be careful when handling my items. I always have been a fractal lover since the define and Meshify C. Glad to continue the tradition!

Great price Easy to build in Great size Simple look but it's beautiful Give you a lot of room for GPUs Can use back connect motherboards Feels premium So many fan mounting options Buy it already!

Package was undamaged when it arrived. Tracking of merchandise was easy and delivery was right on time.

- This case is fantastic for easy access from both the front and back. - Glass and side panel can be removed without tools. They are clipped in place. - Cable management is excellent. - Hard drives are on doors that swing for easy access. You have multiple locations for drives depending on your layout. - The glass provides a great view of the inside as there is no corner post to block the view. - Fans can be mounted on the top, bottom, or side of the case. - Came with plenty of hardware to mount drives and includes rubber mounts for platter drives. Two cages can be used to hide full size platter drives. (I am only using one as shown in the picture.)